https://qa.mandrakesoft.com/show_bug.cgi?id=880
------- Additional Comments From [EMAIL PROTECTED] 2003-01-21 17:28 ------- With Iwill XP333-R, which uses the hpt372 onboard controller, I have been building a kernel and the hpt driver to use a Maxtor and Seagate as jbod (sda, sdb) on this controller. Following the kernel list infos about ac1 support for this controller, I have built a 2.4.20-ac1. As hde and hdg, these disks seem to be working well with this kernel: hdparm shows dma enabled; md5sum of isos working correctly. I have not used this extensively but the success of these rudimentary tests is in sharp contrast to the typical failure to mount with previous Mandrake kernels. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
