Le Mardi 21 Janvier 2003 16:53, Chmouel Boudjnah a �crit :
> Pascal Cavy <[EMAIL PROTECTED]> writes:
> > hum, the panic occurs in /etc/rc.sysinit during the mv of the ksyms.?
> > files so I don't have any oops file available.
>
> and do you have any others information message or which process ?
I've got the console output on a tty now. attached.
--
Pascal Cavy - VMF
__________________________________________________________________
Running 14 min, 8 users, load average: 0.26, 0.43, 0.38
(gcc version 3.2 (Mandrake Linux 9.1 3.2-4mdk))
Kernel Linux version 2.4.20-2mdkenterprise
Linux version 2.4.21-0.pre3.1mdkenterprise ([EMAIL PROTECTED]) (gcc version
3.2.1 (Mandrake Linux 9.1 3.2.1-2mdk)) #1 SMP Thu Jan 16 19:00:29 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000004fffc000 (usable)
BIOS-e820: 000000004fffc000 - 000000004ffff000 (ACPI data)
BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 327676
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 98300 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f75e0
ACPI: RSDT (v001 ASUS <P4B> 16944.11825) @ 0x4fffc000
ACPI: FADT (v001 ASUS <P4B> 16944.11825) @ 0x4fffc100
ACPI: BOOT (v001 ASUS <P4B> 16944.11825) @ 0x4fffc040
ACPI: MADT (v001 ASUS <P4B> 16944.11825) @ 0x4fffc080
ACPI: DSDT (v001 ASUS <P4B> 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Unknown CPU [15:1] APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x16] polarity[0x3] trigger[0x3])
Using ACPI (MADT) for SMP configuration information
Kernel command line: BOOT_IMAGE=2421-1ent ro root=305 devfs=mount hdc=ide-scsi
console=ttyS0,9600
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1715.302 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3420.97 BogoMIPS
Memory: 1291964k/1310704k available (1556k kernel code, 18352k reserved, 550k data,
160k init, 393200k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#0.
CPU0: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02
per-CPU timeslice cutoff: 731.51 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=0
testing the IO APIC.......................
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1715.3931 MHz.
..... host bus clock speed is 100.9052 MHz.
cpu: 0, clocks: 1009052, slice: 504526
CPU0<T0:1009040,T1:504512,D:2,S:504526,C:1009052>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
ACPI: Subsystem revision 20021212
PCI: PCI BIOS revision 2.10 entry at 0xf11f0, last bus=2
PCI: Using configuration type 1
ACPI-0263: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0263: *** Info: GPE Block1 defined as GPE16 to GPE31
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: overridden by ACPI.
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 18
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio
hda: IC35L060AVER07-0, ATA DISK drive
hdb: IC35L060AVVA07-0, ATA DISK drive
blk: queue c0398e00, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0398f4c, I/O limit 4095Mb (mask 0xffffffff)
hdc: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=7476/255/63, UDMA(100)
hdb: host protected area => 1
hdb: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=7476/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
/dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 p7 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Swsusp beta 16: malfunctioning SMP support. Disabled :(
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 85k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Red Hat nash verJournalled Block Device driver loaded
sion 3.1.6-mdk sEXT3-fs: INFO: recovery required on readonly filesystem.
tarting
LoadingEXT3-fs: write access will be enabled during recovery.
jbd module
Loading ext3 module
Mounting /proc filesystem
Creating root device
Mounting root filesystem
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Remounting devfs at correct place if necessary
Mounted devfs on /dev
Freeing unused kernel memory: 160k freed
INIT: version 2.84 booting
Setting default font (lat0-16): [ OK ]
Amor�age en catienter ...
Bienvenue sous Mandrake Linux 9.1
Pressez 'I' pour activer le mode interactif.
Lancement du service DevFs : [ OK ]
klogctl: Invalid argument
D�montage du RAMdisk initrd [ OK ]
Mise en place des param�tres du noyau : [ OK ]
Real Time Clock Driver v1.10e
R�glage de l'horloge (utc): mar jan 21 19:14:06 CET 2003 [ OK ]
Affectation du nom de machine pcpc.vmfacility.fr : [ OK ]
Initialisation du contr�leur USB (usb-uhci) : [ OK ]
Montage du syst�me de fichier USB [ OK ]
V�rification du syst�me de fichiers racine
/dev/hda5: clean, 177655/1281696 files, 1104974/2558343 blocks
[ OK ]
Remontage du syst�EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), me de fichiers
rinternal journal
acine en �criturhub.c: new USB device 00:1f.2-1, assigned address 2
e : [ OK ]
Activation des partitions d'�chahub.c: USB hub found
nges (swap) : hub.c: 4 ports detected
Adding Swap: 401584k swap-space (priority -1)
Adding Swap: 1911692k swap-space (priority -2)
[ OK ]
Recherche des d�pendances des modules : hub.c: new USB device 00:1f.2-2, assigned
address 3
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: new USB device 00:1f.2-1.1, assigned address 4
usb.c: USB device 4 (vend/prod 0x4b8/0x104) is not claimed by any active driver.
[ OK ]
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LG Model: DVD-ROM DRD8160B Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
hub.c: new USB device 00:1f.2-1.3, assigned address 5
V�rification des syst�mes de fichiers
usb.c: USB device 5 (vend/prod 0x5a9/0x511) is not claimed by any active driver.
/dev/hda1 contains a file system with errors, check forced.
/dev/hdb1: clean, 53/76304 files, 23557/305203 blocks
/dev/hdb7: clean, 47414/5952128 files, 4450626/11900140 blocks
/dev/hdb5: clean, 130405/1281696 files, 819486/2558343 blocks
/dev/hda1: |= | 1.8%
/dev/hda1: |====== / 11.1%
/dev/hda1: |========= - 16.6%
/dev/hda1: |========== hub.c: new USB device 00:1f.2-2.3,
assigned address 6
\ 18.4% /dev/hda1: |===============
usb.c: USB device 6 (vend/prod 0x45e/0x1e) is not claimed by any active driver.
| 27.6% /dev/hda1: |================= /
29.5% /dev/hda1: |==================== - 35.0%
/dev/hda1: |====================== \ 38.7%
/dev/hda1: |============================= | 51.6%
/dev/hda1: |==================================== / 64.5%
/dev/hda1: |======================================= - 70.0%
/dev/hda1: |================================================== \ 90.0%
/dev/hda1: |==================================================== | 92.0%
/dev/hda1: |===================================================== / 95.0%
/dev/hda1: |===================================================== - 95.1%
/dev/hda1: |========================================================| 100.0%
/dev/hda1:
57/76304 files (21.1% non-contiguous), 16890/305203 blocks
/dev/hda7: recovering journal
/dev/hda7: clean, 21834/6144000 files, 2355311/12277668 blocks
[ FAIT ]
Montage des syst�mes de fichiers locaux : kjournald starting. Commit interval 5
seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[ OK ]
V�rification des syst�mes de fichiers loopback : [ OK ]
usb.c: registered new driver usbscanner
scanner.c: 0.4.9:USB Scanner Driver
Montage des syst�mes de fichiers loopback : [ OK ]
Linux video capture interface: v1.00
Chargement du affectation claviei2c-core.o: i2c core module version 2.7.0 (20021208)
r : fr-latin1 usb.c: registered new driver ov511
ov511_main.c: USB OV511 video device found
ov511_main.c: model: Mustek WCam 3X
usb.c: registered new driver usb_mouse
[ OK ]
Chargement des touches compose: compose.latin.inc ov511_main.c: Sensor is an OV76BE
ov511_main.c: Device 5 on bus 1 registered to minor 0
usb-uhci.c: interrupt, status 3, frame# 1342
input0: Microsoft Microsoft IntelliMouse� Explorer on usb1:6.0
ov511_main.c: v2.16 : ov511 USB Camera Driver
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
[ OK ]
La touche effacement (<-) envoie : ^?[ OK ]
Activation des espaces d'�change : [ OK ]
Application des param�tres de disque dur pour hdblk: queue c0398e00, a: I/O limit
4095Mb (mask 0xffffffff)
[ OK ]
Application des param�tres de diblk: queue c0398f4c, sque dur pour hdI/O limit 4095Mb
(mask 0xffffffff)
b: [ OK ]
EXT2-fs error (device ide0(3,1)): ext2_check_page: bad entry in directory #2: rec_len
is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0
kernel BUG in header file at line 160
------------[ cut here ]------------
kernel BUG at panic.c:141!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c0120759>] Not tainted
EFLAGS: 00010282
EIP is at (2.4.21-0.pre3.1mdkenterprise)
eax: 00000026 ebx: 00000000 ecx: 00000001 edx: 00000001
esi: c0398d40 edi: 00001000 ebp: f7c11b70 esp: f7c11b68
ds: 0018 es: 0018 ss: 0018
Process rc.sysinit (pid: 720, stackpage=f7c11000)
Stack: c0297600 000000a0 f7c11ba0 c01fa995 000000a0 00000000 00000014 00000014
00000000 00000001 f7cae000 f7cb0000 c0398df0 00000000 f7c11bd0 c01fab70
c0398d40 f7ca7420 00000002 f7149d60 f7c9aa94 00000000 c0398d40 c0398d40
Call Trace: [<c01fa995>] (0xf7c11b74))
[<c01fab70>] (0xf7c11ba4))
[<c01fb09d>] (0xf7c11bd4))
[<c01e6822>] (0xf7c11bfc))
[<c01efb84>] (0xf7c11c28))
[<c01eeb3a>] (0xf7c11c8c))
[<c01eecd1>] (0xf7c11cc8))
[<c01eee1c>] (0xf7c11cec))
[<c01c58f6>] (0xf7c11cfc))
[<c012638a>] (0xf7c11d0c))
[<c014e5b4>] (0xf7c11d28))
[<c0138956>] (0xf7c11d34))
[<c013931c>] (0xf7c11d5c))
[<c01396f0>] (0xf7c11d8c))
[<c013988a>] (0xf7c11dac))
[<c01396f0>] (0xf7c11dbc))
[<c014a34d>] (0xf7c11dc8))
[<c0152d46>] (0xf7c11df4))
[<c015332e>] (0xf7c11e1c))
[<c01538f9>] (0xf7c11e40))
[<c0107d8d>] (0xf7c11fa0))
[<c01096ef>] (0xf7c11fc0))
Code: 0f 0b 8d 00 45 9a 29 c0 eb 0d 90 90 90 90 90 90 90 90 90 90
/etc/rc.d/rc.sysinit: line 1105: 720 Segmentation fault mv /var/log/ksyms.$i
/var/log/ksyms.$(($i+1)) >/var/log/pc$t 2>&1
^M^M
