Hi list.

I wonder if someone has a cure for this:

[root@oden /]# hdparm -d1 /dev/hda

/dev/hda:
 setting using_dma to 1 (on)
 HDIO_SET_DMA failed: Operation not permitted
 using_dma    =  0 (off)

"Operation not permitted", WTF???


[root@oden /]# hdparm -I /dev/hda

/dev/hda:

ATA device, with non-removable media
        Model Number:       SAMSUNG SV0813H
        Serial Number:      0596J1FTB04029
        Firmware Revision:  RJ100-15
Standards:
        Used: ATA/ATAPI-6 T13 1410D revision 1
        Supported: 6 5 4 3
Configuration:
        Logical         max     current
        cylinders       16383   4047
        heads           16      16
        sectors/track   63      255
        --
        CHS current addressable sectors:   16511760
        LBA    user addressable sectors:  156368016
        device size with M = 1024*1024:       76351 MBytes
        device size with M = 1000*1000:       80060 MBytes (80 GB)
Capabilities:
        LBA, IORDY(cannot be disabled)
        bytes avail on r/w long: 4      Queue depth: 1
        Standby timer values: spec'd by Standard, no device specific minimum
        R/W multiple sector transfer: Max = 16  Current = 16
        Recommended acoustic management value: 128, current value: 128
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
           *    READ BUFFER cmd
           *    WRITE BUFFER cmd
           *    Host Protected Area feature set
           *    Look-ahead
           *    Write cache
           *    Power Management feature set
                Security Mode feature set
                SMART feature set
           *    Mandatory FLUSH CACHE command
           *    Automatic Acoustic Management feature set
                SET MAX security extension
           *    DOWNLOAD MICROCODE cmd
           *    SMART self-test
           *    SMART error logging
Security:
        Master password revision code = 65534
                supported
        not     enabled
        not     locked
                frozen
        not     expired: security count
                supported: enhanced erase
        102min for SECURITY ERASE UNIT. 102min for ENHANCED SECURITY ERASE 
UNIT.
HW reset results:
        CBLID- above Vih
        Device num = 0 determined by the jumper
Checksum: correct


It's a brand new Samsung disk and a MSI 845 GE Max motherboard. It's making me 
crazy, the slightest disk i/o eats all interrups...

-- 
Regards // Oden Eriksson, Deserve-IT.com

Reply via email to