https://qa.mandrakesoft.com/show_bug.cgi?id=1454
------- Additional Comments From [EMAIL PROTECTED] 2003-02-10 01:20 ------- Guys for you who has problems with the orinocco drivers, can you be kind enough to help me, install the kernel-source package, get the tarball from : https://qa.mandrakesoft.com/~chmou/kernel/orinoco-0.13a.tar.bz2 untar it and type make to compile it. First do a : insmod ./hermes.o insmod ./orinoco.o try to see in the dmesg if everything is fine and get orinoco_cs.o or orinoco_pci.o, the _pci version should work fine (i got this card working on this computer where i type this mail) but i am more interssed in the _cs stuff. you may want to add stuff in pcmcia-cs i don't know yet but if you feel hacker you can send me a patch that works with orinico_cs and default pcmcia config. Cheers, Chmouel and Thanks for the Help. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When using the new orinoco_cs instead of the old but working and now missing wvlan_cs, the following happens: Feb 9 18:13:55 localhost cardmgr[23748]: socket 0: Lucent Technologies WaveLAN/IEEE Adapter Feb 9 18:13:55 localhost kernel: hermes.c: 5 Apr 2002 David Gibson <[EMAIL PROTECTED]> Feb 9 18:13:56 localhost kernel: orinoco.c 0.11b (David Gibson <[EMAIL PROTECTED]> and others) Feb 9 18:13:56 localhost kernel: orinoco_cs.c 0.11b (David Gibson <[EMAIL PROTECTED]> and others) Feb 9 18:13:56 localhost kernel: eth1: Station identity 001f:0001:0007:0034 Feb 9 18:13:56 localhost kernel: eth1: Looks like a Lucent/Agere firmware version 7.52 Feb 9 18:13:56 localhost kernel: eth1: Ad-hoc demo mode supported Feb 9 18:13:56 localhost kernel: eth1: IEEE standard IBSS ad-hoc mode supported Feb 9 18:13:56 localhost kernel: eth1: WEP supported, 104-bit key Feb 9 18:13:56 localhost kernel: eth1: Station name "HERMES I" Feb 9 18:13:56 localhost kernel: eth1: ready Feb 9 18:13:56 localhost kernel: eth1: index 0x01: Vcc 5.0, irq 4, io 0x0100-0x013f Feb 9 18:13:56 localhost /etc/hotplug/net.agent: invoke ifup eth1 Feb 9 18:13:57 localhost kernel: eth1: Error -5 writing Tx descriptor to BAP Feb 9 18:13:58 localhost last message repeated 627 times The system load gets up to 100%. After removing the card, the system load returns to normal. I've also tested this with another lucent card using firmware 6.16: same as above.
