https://qa.mandrakesoft.com/show_bug.cgi?id=1875
------- Additional Comments From [EMAIL PROTECTED] 2003-02-21 00:30 -------
The printer is still not working. It looks like there may be two issues.
1. The parallel port reported a problem.
2. The pnm2ppa script reported an error.
I removed the hp712c printer and then added is using printdrake. Below
are the rpms used for printer and foomatice. Also, the error messages
reported by printdrake.
foomatic-db-3.0-0.beta1.20030213.1mdk.i586.rpm
foomatic-db-engine-3.0-0.beta1.20030213.1mdk.i586.rpm
foomatic-filters-3.0-0.beta1.20030213.1mdk.i586.rpm
printer-filters-1.0-94mdk.i586.rpm
printer-testpages-1.0-94mdk.i586.rpm
printer-utils-1.0-94mdk.i586.rpm
[root@pcp01740874pcs bin]# printerdrake
cupsd (pid 2811) is running...
rmmod: module parport_probe is not loaded
modprobe: Can't locate module parport_probe
modprobe: Can't locate module parport_probe
rmmod: module parport_probe is not loaded
cupsd (pid 2811) is running...
Entity: line 786: error: Opening and ending tag mismatch: arg_longname and
options
</options>
^
Entity: line 787: error: Opening and ending tag mismatch: option and
foomatic
</foomatic>
^
Entity: line 787: error: Extra content at the end of the document
</foomatic>
^
Entity: line 786: error: Opening and ending tag mismatch: arg_longname and
options
</options>
^
Entity: line 787: error: Opening and ending tag mismatch: option and
foomatic
</foomatic>
^
Entity: line 787: error: Extra content at the end of the document
</foomatic>
^
On Thu, 20 Feb 2003, till wrote:
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: NEW
creation_date:
description:
I installed Mandrake 9.1RC1 and could not print. The HP Deskjet 712c
was not supported with the CUPS driver. It appears that pnm2ppa is needed
for printing to this printer but the software is not part of the distribution.
The following links point to some info:
http://www.linuxprinting.org/printer_list.cgi?make=HP
http://www.linuxprinting.org/show_printer.cgi?recnum=71232
When using Mandrake 9.0, I was able to configure this printer during the
installation.
Thanks!
