https://qa.mandrakesoft.com/show_bug.cgi?id=2302
------- Additional Comments From [EMAIL PROTECTED] 2003-02-24 14:38 ------- I also see this problem. A helpful post on Mandrake Club pointed out the cause of the problem. The recent update to printer-filters in Mandrake 9.0 has also introduced the bug to the older release. The file /etc/pnm2ppa.conf in printer-filters-1.0-94 has a different default printer type compared to earlier releases. In 9.0 all versions were commented out so pnm2ppa defaulted to HP720. However in printer-filters-1.0-94 there is a line in /etc/pnm2ppa.conf "version 0" which will disable printing until it is either edited to reflect the actual printer in use, or else just commented out to default to HP720. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: System is known good with LM82 and prints from there OK. If the parport is set in the bios to be normal, the kernel complains at boot time that the lpt interrupt has problems. Parport is currently EPP. In EPP mode system recognizes parport properly at boot time. Printerdrake registers the HP720printer in the visible configuration and tries to configure it as an HP722C. After making corrections, configuration is saved and the chance to do a test print presents itself; however the printer does not print. A user on the expert list reported being able to successfully configure and test his printer on RC1 from a web configuration interface. I might note at this point that none of the foomatic packages are loaded on this system; they did'nt go in at install time. This box is 9.1 RC1 and current with cooker as of Feb 21, 6:00PM EST.
