http://qa.mandrakesoft.com/show_bug.cgi?id=2442
Product: Hardware
Component: Hardware
Summary: USB Malfunction -mice and other USB peripherals
Version: 9.1-0.1mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
Severity: major
Priority: P2
AssignedTo: [EMAIL PROTECTED]
ReportedBy: [EMAIL PROTECTED]
Platform: PC with SiS 645 Chipset (MotherBoard: Gygabyte P4 Titan 667, GA8ST667
Problem common to the 9.1 pre-relase (installation program)
and 9.0 relase (installation program and installed system)
I'm giving informations on both the systems, since I saw the
problem common to both of them. Moreover for the 9.1pre I just
tested the installation program. Seeing It does not work I suspended
the installation.
Also on this PC the network card does not work. Can it be a conflict between
the two drivers?
Connecting a USB mouse does not work.
dmesg gives the followning
------------------------
hub.c: USB new device connect on bus2/1, assigned device number 2
eth0: Tx timeout - resetting
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: USB new device connect on bus2/1, assigned device number 3
eth0: Tx timeout - resetting
eth0: Tx timeout - resetting
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=3 (error=-110)
---------------------------------------
lsmod gives the following (on Mandrake9.0 distrib)
Module Size Used by Not tainted
msdos 5364 0 (autoclean)
isofs 25652 0 (autoclean)
inflate_fs 17892 0 (autoclean) [isofs]
udf 85472 0 (autoclean)
radeon 75736 0
sg 31276 0 (autoclean) (unused)
st 26740 0 (autoclean) (unused)
sr_mod 15096 0 (autoclean) (unused)
sd_mod 11788 0 (autoclean) (unused)
scsi_mod 90372 4 (autoclean) [sg st sr_mod sd_mod]
ide-cd 28712 0 (autoclean)
cdrom 26848 0 (autoclean) [sr_mod ide-cd]
floppy 49340 2 (autoclean)
snd-seq-oss 26176 0 (unused)
snd-seq-midi-event 3208 0 [snd-seq-oss]
snd-seq 33264 2 [snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 36932 0
snd-mixer-oss 9016 0 [snd-pcm-oss]
snd-intel8x0 10880 0
snd-ac97-codec 25508 0 [snd-intel8x0]
snd-pcm 55808 0 [snd-pcm-oss snd-intel8x0]
snd-timer 9964 0 [snd-seq snd-pcm]
snd-mpu401-uart 2752 0 [snd-intel8x0]
snd-rawmidi 12864 0 [snd-mpu401-uart]
snd-seq-device 3836 0 [snd-seq-oss snd-seq snd-rawmidi]
snd 24804 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-pc
m-oss snd-mixer-oss snd-intel8x0 snd-ac97-codec snd-pcm snd-timer snd-mpu401-uar
t snd-rawmidi snd-seq-device]
soundcore 3780 0 [snd]
nfsd 66576 0 (autoclean)
lockd 46480 0 (autoclean) [nfsd]
sunrpc 60188 0 (autoclean) [nfsd lockd]
af_packet 13000 0 (autoclean)
dmfe 13761 1 (autoclean)
nls_cp850 3580 2 (autoclean)
vfat 9588 2 (autoclean)
fat 31864 0 (autoclean) [msdos vfat]
nls_iso8859-15 3356 4 (autoclean)
ntfs 72908 1 (autoclean)
supermount 14340 2 (autoclean)
usb-ohci 18216 0 (unused)
usbcore 58304 1 [usb-ohci]
rtc 6560 0 (autoclean)
ext3 74004 4
jbd 38452 4 [ext3]
--------------------------------------------------------------------
The same messages are obtained if another usb device is connected
to the bus (an HP photosmart camera).
The same problem is seen in a Mandrake 9.0 distribution (during the
install phase and after).
If the PC is started using a Knoppix (live-cd, with 2.4.19 kernel-same
kernel version as Mandrake 9.0-)
distribution, all the devices work properly (including the network
card), so it should not be a kernel-related problem
Connecting the same USB peripherals to another PC (with a sis630 chipset)
work fine (tested with 9.0 -installation and system- and 9.1 pre-relase -only
installation-)
Bye, Dino Ghilardi
[EMAIL PROTECTED]
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
