http://qa.mandrakesoft.com/show_bug.cgi?id=846
------- Additional Comments From [EMAIL PROTECTED] 2003-03-02 23:42 ------- Tablet is functional, though not ideal after install. During install 9.1rc1 it is not recognized or used, requireing another mouse (usb, ps2, serial) to complete the install. Once install is complete, it still has issues. Example. move stylus or mouse to edge of active region of tablet, if mouse pointer is not at edge of screen, it can not be brought to the edge of the screen. If it is at the edge of the screen, (at 1400x1050x24bpp) I can move the stylus or mouse, half to three quarters of the way across the active region, then bring the stylus back (without lifting the stylus or mouse) and as the device moves across the active boundry, I see the pointer anywhere from 20 to 400 pixels away from the screen edge. Only way to recover is to take device to other edge of active region of tablet and drag across the entire width or height of active area to get to the edge of the screen. I would very much like to see a dialog for the Mandrak Control Center to allow for various control capabilities on the Graphire. Adjusting active rang, setting up regions for hot buttons, etc. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Hi there, when I try to installa Mandrake Linux 9.1 beta 1 with Wacom Graphire2 USB, the system stop to boot when try to access to input devices and reboot. This happens with 9.0 too. To solve the problem I must have an other mouse USB installed on the system :((
