Candy Cooking Temperature Chart Hardness Temperature Cold Water Test
Soft Ball Stage 234 - 240°F 110 - 115°C Forms a soft ball that flattens when removed from water. Firm Ball Stage 242 - 248°F 115 - 120°C Forms a firm ball that holds its shape until pressed. Hard Ball Stage 250 - 268°F 120 - 130°C Forms a ball that holds its shape but is pliable. Soft Crack Stage 270 - 290°F 130 - 145°C Separates into hard but not brittle threads. Hard Crack Stage 300 - 310°F 150 - 155°C Separates into hard, brittle threads. Caramel Stage 320 - 350°F 160 - 175°C Do not use cold water test. Mixture coats metal spoon and forms light caramelized mass when poured on a plate. Candy Making Basics: Always use the recommended size saucepan. A smaller or larger pan could affect quality and cooking time. If a size is not stated, size is not important. Don't double the recipe -- make another batch. Increasing ingredients changes cooking time. A cool, dry day is best for making candy. Heat, humidity and altitude can affect quality. On a humid day, cook candy to a temperature a degree or so higher than the recipe indicates. Consult an altitude table to determine boiling point in your area, then adjust recipe if necessary. To prevent crystallization or grainy candy, sugar must dissolve completely over low heat; stir down any grains from side of saucepan. After candy has boiled, do not stir until it has cooled as the recipe indicates. To prevent crystals, do not scrape pan or stir candy during cooling. Use a reliable candy thermometer. check your candy thermometer for accuracy by placing it in water and bring it to boiling. The thermometer should read 212*F /100*C (see Note). If the reading is higher or lower, take the difference into account when testing your temperature while making candy. To get an accurate reading, be sure the thermometer stands upright in cooking mixture and bulb does not rest on bottom of pan. Read it at eye level; watch temperature closely. After 200*F (95*C), temperatures go up very quickly. If you don't have a thermometer, use the cold water test. Using a clean spoon, drop small amount of cooking mixture into a cupful of very cold water. Test hardness with fingers (see candy cooking test chart). If candy does not pass test, continue cooking. Repeat water test with clean water. Enjoy. >From Vicki. _______________________________________________ Cookinginthedark mailing list [email protected] http://acbradio.org/mailman/listinfo/cookinginthedark
