I tried to use flashrom from LB/util/flashrom this what I have got first run to test # ./flashrom Calibrating delay loop... ok No LinuxBIOS table found Found chipset "VT8235": Enabling flash write... Ok Found board "VIA EPIA M/MII/... " Enabling flash write... Ok SST39SF020A found at physical address: 0xfffc0000 Flash part is SST39SF020A (256Kb) Ok, onla ENABLING flash write, but NOT flashing. # That"s seems to be ok, board and flash part indeed matches to the hardware ))) Now I ma trying to flash
#./flashrom -w linuxbios.rom Calibrating delay loop... ok No LinuxBIOS table found Found chipset "VT8235": Enabling flash write... Ok Found board "VIA EPIA M/MII/... " Enabling flash write... Ok SST39SF020A found at physical address: 0xfffc0000 Flash part is SST39SF020A (256Kb) linuxbios.rom: Bad address # so, I tried to save image from flash, and tried to flash whith saved image and got the same Bad address. Could somebody tell what the trouble is? -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
