Hi,

On Fri, Jan 18, 2008 at 05:11:15PM +0800, bxshi wrote:
> 2008/1/18, bxshi <[EMAIL PROTECTED]>:
> >
> > This patch is for winbond w83627DHG superio support in superiotool . I
> > have test that on my board, it works ;)
> > Thanks for Uwe to help me make a SVN diff patch.

Looks good!


> > signed-off-by : Bingxun Shi <[EMAIL PROTECTED]>

Acked-by: Peter Stuge <[EMAIL PROTECTED]>


> Index: winbond.c
> ===================================================================
> --- winbond.c (Revision 3051)
> +++ winbond.c (Arbeitskopie)
> @@ -143,6 +143,57 @@
>               {EOT}}},
>  #endif
>       {0xa02, "W83627DHG", {
> +             {NOLDN, NULL,
> +                     {0x02,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,
> +                      0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT},
> +                     {0x00,0xa0,NANA,0xff,0x00,MISC,0x00,MISC,RSVD,0x50,
> +                      0x00,0x00,RSVD,0xe2,0x21,0x00,0x00,EOT}},
> +             {0x0, "Floppy",
> +                     {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,0xf5,
> +                      EOT},
> +                     {0x01,0x03,0xf0,0x06,0x02,0x8e,0x00,0xff,0x00,0x00,
> +                      EOT}},
> +             {0x1, "Parallel port",
> +                     {0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
> +                     {0x01,0x03,0x78,0x07,0x04,0x3f,EOT}},
> +             {0x2, "COM1",
> +                     {0x30,0x60,0x61,0x70,0xf0,EOT},
> +                     {0x01,0x03,0xf8,0x04,0x00,EOT}},
> +             {0x3, "COM2",
> +                     {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
> +                     {0x01,0x02,0xf8,0x03,0x00,0x00,EOT}},
> +             {0x5, "Keyboard",
> +                     {0x30,0x60,0x61,0x62,0x63,0x70,0x72,0xf0,EOT},
> +                     {0x01,0x00,0x60,0x00,0x64,0x01,0x0c,0x83,EOT}},
> +             {0x6, "Serial peripheral interface",
> +                     {0x30,0x62,0x63,EOT},
> +                     {0x00,0x00,0x00,EOT}},
> +             {0x7, "GPIO 6",
> +                     {0x30,0xf4,0xf5,0xf6,0xf7,EOT},
> +                     {0x00,0xff,0x00,0x00,0x00,EOT}},
> +             {0x8, "WDTO#, PLED",
> +                     {0x30,0xf5,0xf6,0xf7,EOT},
> +                     {0x00,0x00,0x00,0x00,EOT}},
> +             {0x9, "GPIO 2, GPIO 3, GPIO 4, GPIO 5",
> +                     {0x30,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe8,
> +                      0xe9,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,0xfe,
> +                      EOT},
> +                     {0x00,0xff,0x00,0x00,0xff,0x00,0x00,0x00,0x00,0x00,
> +                      0x00,0xff,0x00,0x00,0x00,0xff,0x00,0x00,0x00,0x00,
> +                      EOT}},
> +             {0xa, "ACPI",
> +                     {0x30,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,
> +                      0xe8,0xe9,0xf2,0xf3,0xf4,0xf6,0xf7,0xfe,EOT},
> +                     {0x00,0x00,0x01,0x00,0xff,0x08,0x00,RSVD,0x1c,0x00,
> +                      RSVD,RSVD,0x7c,0x00,0x00,0x00,0x00,0x00,EOT}},
> +             {0xb, "Hardware monitor",
> +                     {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT},
> +                     {0x00,0x00,0x00,0x00,0x81,0x00,0x00,EOT}},
> +             {0xc, "PECI, SST",
> +                     {0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe8,0xf1,0xfe,0xff,
> +                      EOT},
> +                     {0x00,0x48,0x48,0x48,0x48,0x00,0x00,0x48,0x00,0x00,
> +                      EOT}},
>               {EOT}}},
>       {0x886, "W83627EHF/EF/EHG/EG", { /* sensors-detect: 0x8853 possible */
>               {NOLDN, NULL,

-- 
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to