On Jan 30, 2008 9:50 AM, <[EMAIL PROTECTED]> wrote: > Hello, > I am racking my brains with this. No matter what I do I can't seem to > get the nic working. The nic is onboard the i82801DB southbridge down > from the PCI bridge, so my Config.lb looks something like this: > > device pci 1e.0 on # PCI bridge: Intel Corporation 82801 PCI Bridge > chip drivers/pci/onboard > device pci 08.0 on end # Intel Corporation 82801DB PRO/100 VE Ethernet > Controller > end > end
I think your config is wrong, and at the very least, you don't need the "chip" line, unless you're loading a rom for it. Bear with me, I'm stuck in windows atm, but I'm pretty sure it's lspci -t that shows how the devices are connected. Might also be a good idea to look at the setup for another board, perhaps the intel jarrell or xe7501devkit has an onboard nic -Corey > But no matter what I try coreboot thinks it is a static device and > disables it. > > do_pci_scan_bridge for PCI: 00:1e.0 > PCI: pci_scan_bus for bus 01 > PCI: devfn 0x0, bad id 0xffffffff > PCI: devfn 0x8, bad id 0xffffffff > PCI: devfn 0x10, bad id 0xffffffff > PCI: devfn 0x18, bad id 0xffffffff > PCI: devfn 0x20, bad id 0xffffffff > PCI: devfn 0x28, bad id 0xffffffff > PCI: devfn 0x30, bad id 0xffffffff > PCI: devfn 0x38, bad id 0xffffffff > Disabling static device: PCI: 01:08.0 > > This wouldn't really be a problem if Linux detected it but that is not > even happening. I am really stumped here. I even tried loading the > Intel Boot Agent pci rom from the original bios but the same thing > happens. Help? > Thanks - Joe > > -- > coreboot mailing list > [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
