On 02.02.2008 10:58, Rudolf Marek wrote: > ron minnich wrote: > > I think our goal should be to get our first v3 port to the k8. > > DDR or DDR2 based?
DDR init code is easier, but almost all current processors have DDR2 or DDR3. > > We need a good, simple, cheap, target board with really common IO > > (i.e. PATA, serial, etc.) > > Hmm I would say K8T890+VT8237 it works fine and I have the datasheets > (even for > onboard clockchip ;) Great. Can we pick a socket AM2 board with these chips? Such boards are more readily available than socket 939 boards and usually they are also cheaper. A list of socket AM2 boards with K8T890/K8M890, availability and price in Germany follows: Asrock ALiveSATA2-GLAN, K8T890 (50 €) Asus M2V, K8T890 (63 €, difficult to get) Asus M2V-X (unavailable) Asus M2V-TVM, K8M890 (49 €, difficult to get) Asus M2V-MX, K8M890 (43 €) Asus M2V-MX SE, K8M890 (38 €) Foxconn K8M890M2MA-RS2H, K8M890 (40 €) Foxconn K8M890M2MB-RS2H, K8M890 (36 €) MSI K9VGM-V, K8M890 (38 €) > There are at least two boards: > Asus A8V-E Deluxe - uwe has it - very similar to mine, just IRQ > routing must be > fixed. > > Asus A8V-E SE - I have it. I checked ebay and there is 7 boards left. > ($123) That's really expensive. See above for my preferences. However, it would be great if we had a board supported in v2 before we try to port it to v3. Regards, Carl-Daniel -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
