Hi...... Thanks for your reply........
We have tried like this,we have copied original BIOS(PM49FL004) content in the filename feb6 and tried to flash on SST49LF004B flashrom chip and then we followed this steps ..... [EMAIL PROTECTED] ~]# /usr/sbin/flashrom -E Calibrating delay loop... OK. No LinuxBIOS table found. Found chipset "VT8237", enabling flash write... OK. SST49LF004A/B found at physical address 0xfff80000. Flash part is SST49LF004A/B (512 KB). Erasing flash chip [EMAIL PROTECTED] ~]# /usr/sbin/flashrom -w feb6 Calibrating delay loop... OK. No LinuxBIOS table found. Found chipset "VT8237", enabling flash write... OK. SST49LF004A/B found at physical address 0xfff80000. Flash part is SST49LF004A/B (512 KB). Flash image seems to be a legacy BIOS. Disabling checks. Programming page: 0007 at address: 0x00070000 [EMAIL PROTECTED] ~]# /usr/sbin/flashrom -v feb6 Calibrating delay loop... OK. No LinuxBIOS table found. Found chipset "VT8237", enabling flash write... OK. SST49LF004A/B found at physical address 0xfff80000. Flash part is SST49LF004A/B (512 KB). Flash image seems to be a legacy BIOS. Disabling checks. Verifying flash... FAILED! Still we are unable to flash , please guide us which procedure should follow and is it necessary for us to change the flashrom chip? otherwise is it required to change the code in flashrom utility....? if it is require please guide where we need to change.. such that flash can happen.. with regards, Lalitha.
-- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
