Dear coreboot readers! This is the automated build check service of coreboot.
The developer "hailfinger" checked in revision 3091 to the coreboot source repository and caused the following changes: Change Log: Handle JEDEC JEP106W continuation codes in SPI RDID. Some vendors like Programmable Micro Corp (PMC) need this. Both the serial and parallel flash JEDEC detection routines would benefit from a parity/sanity check of the vendor ID. Will do this later. Add support for the PMC Pm25LV family of SPI flash chips. Signed-off-by: Carl-Daniel Hailfinger <[EMAIL PROTECTED]> Acked-by: Chris Lingard <[EMAIL PROTECTED]> Build Log: Compilation of amd:serengeti_cheetah_fam10 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=3091&device=serengeti_cheetah_fam10&vendor=amd If something broke during this checkin please be a pain in hailfinger's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
