On Sat, Feb 09, 2008 at 09:40:54AM -0800, ron minnich wrote: > On Feb 9, 2008 9:27 AM, Stefan Reinauer <[EMAIL PROTECTED]> wrote: > > We need to add all information from irq_tables.c to the mainboard > > DTS and read it from there. The mainboard DTS is our central data > > structure.
Was just about to write same. > you are right and I was not thinking. I will work on this today. > > BTW, boot time is "really fast". So fast I can't easily time it. > And there are some warning prints in there that need to be debug, > so there is room to make it just a tad faster. From power on to > FILO prompt just feels instantaneous, though. Just as if modern firmware was running on modern hardware! ;) > OK, I will look at this dts issue. I wonder if we need a pirq node > in the dts? I think interrupt routing in dts will need a bit of thought. Perhaps we can combine all previous ways of describing interrupt routing in a new, better, simpler way? Then have generators for ACPI, PIRQ, device tree, whatever.. //Peter -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
