Remove some remaining code inside #if 0.
Signed-off-by: Carl-Daniel Hailfinger <[EMAIL PROTECTED]>
Index: LinuxBIOSv3-if0crud/northbridge/amd/geodelx/raminit.c
===================================================================
--- LinuxBIOSv3-if0crud/northbridge/amd/geodelx/raminit.c (Revision 591)
+++ LinuxBIOSv3-if0crud/northbridge/amd/geodelx/raminit.c (Arbeitskopie)
@@ -216,15 +216,6 @@
if (spd_byte1 == 0xFF)
spd_byte1 = 0;
- /* I don't think you need this check. */
-#if 0
- if (spd_byte0 < 0xA0 || spd_byte0 < 0xA0) {
- printk(BIOS_EMERG, "DIMM overclocked. Check GeodeLink speed\n");
- post_code(POST_PLL_MEM_FAIL);
- hlt();
- }
-#endif
-
/* Use the slowest DIMM. */
if (spd_byte0 < spd_byte1)
spd_byte0 = spd_byte1;
@@ -580,13 +571,6 @@
msr.lo &= ~0xF0;
msr.lo |= 0x40; /* Set refresh to 4 SDRAM clocks. */
wrmsr(MC_CF07_DATA, msr);
-
- /* Memory Interleave: Set HOI here otherwise default is LOI. */
-#if 0
- msr = rdmsr(MC_CF8F_DATA);
- msr.hi |= CF8F_UPPER_HOI_LOI_SET;
- wrmsr(MC_CF8F_DATA, msr);
-#endif
}
/**
Index: LinuxBIOSv3-if0crud/northbridge/amd/geodelx/geodelx.c
===================================================================
--- LinuxBIOSv3-if0crud/northbridge/amd/geodelx/geodelx.c (Revision 591)
+++ LinuxBIOSv3-if0crud/northbridge/amd/geodelx/geodelx.c (Arbeitskopie)
@@ -163,20 +163,6 @@
printk(BIOS_SPEW, ">> Entering northbridge.c: %s\n", __FUNCTION__);
enable_shadow(dev);
-
-#if 0
- /* Swiss cheese */
- msr = rdmsr(MSR_GLIU0_SHADOW);
-
- msr.hi |= 0x3;
- msr.lo |= 0x30000;
-
- printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n",
- MSR_GLIU0_SHADOW, msr.hi, msr.lo);
- printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n",
- MSR_GLIU1_SHADOW, msr.hi, msr.lo);
- /* TODO: Is the respective wrmsr() missing? */
-#endif
}
/**
--
http://www.hailfinger.org/
--
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
