-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello
And finally a patch for my board. It enables the GPIOs correctly (it preserves the GPIO5/2 from a sio_setup. As side effect I can now have GAME and MIDI ports enabled. It has been tested with my board. It produces same results. Signed-off-by: Rudolf Marek <[EMAIL PROTECTED]> Thanks, Rudolf -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHt4AS3J9wPJqZRNURAmWLAJwNDN/CcA1Cz92tgj6gt/vN8qCGdQCfckEN YgIvJBQYGhSbisZlDBOrY3M= =Jtt/ -----END PGP SIGNATURE-----
Index: src/mainboard/asus/a8v-e_se/Config.lb
===================================================================
--- src/mainboard/asus/a8v-e_se/Config.lb (revision 3100)
+++ src/mainboard/asus/a8v-e_se/Config.lb (working copy)
@@ -231,24 +231,30 @@
end
device pnp 2e.5 off #keyb OFF
end
- device pnp 2e.6 off # SERIAL_FLASH
+ device pnp 2e.106 off # SERIAL_FLASH
io 0x60 = 0x100
end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- # io 0x60 = 0x220
- # io 0x62 = 0x300
- # irq 0x70 = a
+
+ device pnp 2e.007 off #GPIO1 off
end
+ device pnp 2e.107 on #GAME on
+ io 0x60 = 0x201
+ end
+ device pnp 2e.207 on #MIDI on
+ io 0x62 = 0x330
+ irq 0x70 = 0xa
+ end
+ device pnp 2e.307 off #GPIO6 off
+ end
device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO2_GPIO3_GPIO4_GPIO5 0x30 0x9
- #GPIO 5 and 2 active
- #0xe0 = de
- #0xe1 = 01
- #0xe2 = 00
- #0xe3 = 03
- #0xe4 = a4
- #0xe5 = 00
-
+ device pnp 2e.009 on #GPIO2 on Logical device 9 is in sio_setup
+ end
+ device pnp 2e.109 off #GPIO3 off
+ end
+ device pnp 2e.209 off #GPIO4 off
+ end
+ device pnp 2e.309 on #GPIO5 on
+ end
device pnp 2e.a off end # ACPI
device pnp 2e.b on # HW Monitor
io 0x60 = 0x290
-- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
