Author: ruik Date: 2008-02-18 21:35:27 +0100 (Mon, 18 Feb 2008) New Revision: 3105
Modified:
trunk/coreboot-v2/src/mainboard/asus/a8v-e_se/Config.lb
Log:
Use virtual LDNs. It enables the GPIOs correctly (it preserves the GPIO5/2 from
a sio_setup. As side effect I can now
have GAME and MIDI portsenabled.
It has been tested with my board. It produces same results.
Signed-off-by: Rudolf Marek <[EMAIL PROTECTED]>
Acked-by: Stefan Reinauer <[EMAIL PROTECTED]>
Modified: trunk/coreboot-v2/src/mainboard/asus/a8v-e_se/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/asus/a8v-e_se/Config.lb 2008-02-18
20:32:46 UTC (rev 3104)
+++ trunk/coreboot-v2/src/mainboard/asus/a8v-e_se/Config.lb 2008-02-18
20:35:27 UTC (rev 3105)
@@ -231,24 +231,30 @@
end
device pnp 2e.5 off
#keyb OFF
end
- device pnp 2e.6 off #
SERIAL_FLASH
+ device pnp 2e.106 off #
SERIAL_FLASH
io 0x60 = 0x100
end
- device pnp 2e.7 off #
GAME_MIDI_GIPO1
- # io 0x60 = 0x220
- # io 0x62 = 0x300
- # irq 0x70 = a
+
+ device pnp 2e.007 off
#GPIO1 off
end
+ device pnp 2e.107 on
#GAME on
+ io 0x60 = 0x201
+ end
+ device pnp 2e.207 on
#MIDI on
+ io 0x62 = 0x330
+ irq 0x70 = 0xa
+ end
+ device pnp 2e.307 off
#GPIO6 off
+ end
device pnp 2e.8 off end
# WDTO_PLED
- device pnp 2e.9 off end
# GPIO2_GPIO3_GPIO4_GPIO5 0x30 0x9
-
#GPIO 5 and 2 active
- #0xe0 = de
- #0xe1 = 01
- #0xe2 = 00
- #0xe3 = 03
- #0xe4 = a4
- #0xe5 = 00
-
+ device pnp 2e.009 on
#GPIO2 on Logical device 9 is in sio_setup
+ end
+ device pnp 2e.109 off
#GPIO3 off
+ end
+ device pnp 2e.209 off
#GPIO4 off
+ end
+ device pnp 2e.309 on
#GPIO5 on
+ end
device pnp 2e.a off end
# ACPI
device pnp 2e.b on #
HW Monitor
io 0x60 = 0x290
--
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
