Quoting Stefan Reinauer <[EMAIL PROTECTED]>: > * [EMAIL PROTECTED] <[EMAIL PROTECTED]> [080219 17:29]: >> > Vendor ID: rca, part ID: rm4100 >> > Found chipset "ICH4/ICH4-L", enabling flash write... OK. >> > NOT FOUND rca:rm4100 >> > M50FW080 found at physical address 0xfff00000. >> > Flash part is M50FW080 (1024 KB). >> > ERASE FAILED @0, val 92! >> > >> > >> > After this I tried the -E option (worked good) to erase it and than >> > tried again with no luck, same message, any ideas?? >> > >> Has anyone ever seen this error before??? >> ERASE FAILED @0, val 92! > > Yes, it means the actual flash write mechanism is protected, though the > ID command gets through. I had the same thing on another ICH4M board. > Might be SMM protection, some GPIO or some other mapping/locking > mechanism. > > Stefan > Ahhhh, all the more reason for the "intel-debugtools" :-)
Thanks - Joe -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
