This is a first file for the dbe62. I am adding this so others can see where to get the data sheet and maybe help me get the right values in. :-)
thanks ron
First file for dbe62. This is a different part, and timing, than dbe61 so they can not share this file. Signed-off-by: Ronald G. Minnich <[EMAIL PROTECTED]> Index: mainboard/artecgroup/dbe62/initram.c =================================================================== --- mainboard/artecgroup/dbe62/initram.c (revision 0) +++ mainboard/artecgroup/dbe62/initram.c (revision 0) @@ -0,0 +1,136 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2007 Ronald G. Minnich + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define _MAINOBJECT + +#include <types.h> +#include <lib.h> +#include <console.h> +#include <device/device.h> +#include <device/pci.h> +#include <string.h> +#include <msr.h> +#include <io.h> +#include <amd_geodelx.h> +#include <northbridge/amd/geodelx/raminit.h> +#include <spd.h> + +#define MANUALCONF 0 /* Do automatic strapped PLL config */ +#define PLLMSRHI 0x00001490 /* manual settings for the PLL */ +#define PLLMSRLO 0x02000030 +#define DIMM0 ((u8) 0xA0) +#define DIMM1 ((u8) 0xA2) + +/* The part is a Micron MT46V16M16 P 5B + * 4 M x 16 x 5 Banks, 200 Mhz, Plastic package, TSOP, DDR400B, 5 ns CL3 + * Commercial rating. + * @ 200 ns, data-out window, 1.6; access, +- 70 ns; dqs-dq skew: .4ns + * http://www.micron.com/products/partdetail?part=MT46V16M16P-5B + */ +/* SPD array */ +static const u8 spdbytes[] = { + [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x10, + [SPD_BANK_DENSITY] = 0x40, + [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0xff, + [SPD_MEMORY_TYPE] = 7, + [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 10, /* A guess for the tRAC value */ + [SPD_MODULE_ATTRIBUTES] = 0xff, /* FIXME later when we figure out. */ + [SPD_NUM_BANKS_PER_SDRAM] = 4, + [SPD_PRIMARY_SDRAM_WIDTH] = 8, + [SPD_NUM_DIMM_BANKS] = 1, + [SPD_NUM_COLUMNS] = 0xa, + [SPD_NUM_ROWS] = 3, + [SPD_REFRESH] = 0x3a, + [SPD_SDRAM_CYCLE_TIME_2ND] = 60, + [SPD_SDRAM_CYCLE_TIME_3RD] = 75, + [SPD_tRAS] = 40, + [SPD_tRCD] = 15, + [SPD_tRFC] = 70, + [SPD_tRP] = 15, + [SPD_tRRD] = 10, +}; + +u8 spd_read_byte(u16 device, u8 address) +{ + printk(BIOS_DEBUG, "spd_read_byte dev %04x\n", device); + + if (device != (0x50 << 1)) { + printk(BIOS_DEBUG, " returns 0xff\n"); + return 0xff; + } + + printk(BIOS_DEBUG, " addr %02x returns %02x\n", address, spdbytes[address]); + + return spdbytes[address]; +} + +/** + * Placeholder in case we ever need it. Since this file is a + * template for other motherboards, we want this here and we want the + * call in the right place. + */ + +static void mb_gpio_init(void) +{ + /* Early mainboard specific GPIO setup */ +} + +/** + * main for initram for the PC Engines Alix 1C. It might seem that you + * could somehow do these functions in, e.g., the cpu code, but the + * order of operations and what those operations are is VERY strongly + * mainboard dependent. It's best to leave it in the mainboard code. + */ +int main(void) +{ + u8 smb_devices[] = { + DIMM0, DIMM1 + }; + printk(BIOS_DEBUG, "Hi there from stage1\n"); + post_code(POST_START_OF_MAIN); + + system_preinit(); + printk(BIOS_DEBUG, "done preinit\n"); + + mb_gpio_init(); + printk(BIOS_DEBUG, "done gpio init\n"); + + pll_reset(MANUALCONF, PLLMSRHI, PLLMSRLO); + printk(BIOS_DEBUG, "done pll reset\n"); + + cpu_reg_init(0, DIMM0, DIMM1); + printk(BIOS_DEBUG, "done cpu reg init\n"); + + sdram_set_registers(); + printk(BIOS_DEBUG, "done sdram set registers\n"); + + sdram_set_spd_registers(DIMM0, DIMM1); + printk(BIOS_DEBUG, "done sdram set spd registers\n"); + + sdram_enable(DIMM0, DIMM1); + printk(BIOS_DEBUG, "done sdram enable\n"); + + /* Check low memory */ + /*ram_check(0x00000000, 640*1024); */ + + printk(BIOS_DEBUG, "stage1 returns\n"); + return 0; +}
-- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
