Hi Jacek, On Wed, Feb 20, 2008 at 08:00:32PM -0600, Jacek Chruscik wrote: > I include log from coreboot startup on EPIA MII with 1.2GHz C3 > processor.
This board should work just fine. > First of all it fails to run my FILO payload, second, I noticed it > may fail on RAM check-up, it sees only 16MB out of 256 or 512 > (tried both) No, it does actually see all your RAM. More below. > Furthermore, I have to wait about 10 sec form power cycle for > coreboot to send anything through serial line. This should not happen. What kind of power supply are you using and how do you power on the board when starting coreboot? > Bank 0 (*16 Mb) 10 > No Physical Banks 01 > Total Memory (*16 Mb) 10 One (01) bank is found, bank 0, which has 16 (10) * 16MB = 256MB. Note that the two-digit value last on each line here is hex but is missing a leading 0x. :\ > Welcome to elfboot, the open sourced starter. > January 2002, Eric Biederman. > Version 1.3 > > Can not load ELF Image. Could you send us the output from your coreboot make? //Peter -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
