On Sat, Feb 23, 2008 at 12:10:48AM +0100, Carl-Daniel Hailfinger wrote: >> /* set the correct sensor types 1,2 thermistor; 3 diode */ >> pnp_write_index(base, 0x51, 0x1c); >> /* set the 'zero' voltage for diode type sensor */ >> pnp_write_index(base, 0x5c, 0x80); >> pnp_write_index(base, 0x56, 0xe5); >> pnp_write_index(base, 0x57, 0xe5); >> pnp_write_index(base, 0x59, 0xe5); >> pnp_write_index(base, 0x5c, 0x00); >> /* fan1 (controlled by temp3) control parameters */ >> /* fan off limit */ >> pnp_write_index(base, 0x60, 0xff); >> /* fan start limit */ >> pnp_write_index(base, 0x61, 0x14); >> /* ???? */ >> pnp_write_index(base, 0x62, 0x00); >> /* start PWM */ >> pnp_write_index(base, 0x63, 0x27); >> /* smooth and slope PWM */ >> pnp_write_index(base, 0x64, 0x90); >> /* direct-down and interval */ >> pnp_write_index(base, 0x65, 0x03); >> /* fan1 auto controlled by temp3 */ >> pnp_write_index(base, 0x15, 0x82); >> /* fan2 soft controlled, max speed */ >> pnp_write_index(base, 0x16, 0x7f); >> /* fan3 soft controlled, 75% speed */ >> pnp_write_index(base, 0x17, 0x60); >> /* all fans enable, fan1 ctl smart */ >> pnp_write_index(base, 0x13, 0x71); >> >> Then the fan is properly controlled. BUT this stuff is far too mainboard >> specific (as opposed to superio specific) to be in this file. It should >> be in a file in the mainboard/gigabyte/m57sli directory (probably even >> V2.0 specific). But I wouldn't know how to link it in so it gets called >> in the ec_init routine. Do you have some suggestions? >> Maybe there is a way to put it in the Config.lb file? >> > > Ronald, > > you did great work tracking this down. Congratulations! > We have to make sure we can handle such settings in v3 easily. > > There is another possible problem with fan settings: Do they belong to (in > the sense of copyright) the mainboard vendor or the BIOS vendor? I don't > want to get nasty letters from anyone.
I think that's going too far. This stuff comes straight from the superio datasheet (check out the comments). There's no way anyone can claim copyright on a bunch of configuration settings imo. Thanks, Ward. -- Ward Vandewege <[EMAIL PROTECTED]> Free Software Foundation - Senior System Administrator -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
