Author: mjones
Date: 2008-02-25 18:20:27 +0100 (Mon, 25 Feb 2008)
New Revision: 619
Added:
coreboot-v3/mainboard/amd/norwich/irq_tables.c
Modified:
coreboot-v3/mainboard/amd/Kconfig
coreboot-v3/mainboard/amd/norwich/Makefile
coreboot-v3/mainboard/amd/norwich/dts
coreboot-v3/mainboard/amd/norwich/initram.c
coreboot-v3/mainboard/amd/norwich/stage1.c
Log:
Updates to Norwich to boot to Linux. Includes initram updates, IRQ routing, and
console output updates.
Signed-off-by: Marc Jones <[EMAIL PROTECTED]>
Acked-by: Peter Stuge <[EMAIL PROTECTED]>
Acked-by: Ronald G. Minnich <[EMAIL PROTECTED]>
Modified: coreboot-v3/mainboard/amd/Kconfig
===================================================================
--- coreboot-v3/mainboard/amd/Kconfig 2008-02-25 16:06:36 UTC (rev 618)
+++ coreboot-v3/mainboard/amd/Kconfig 2008-02-25 17:20:27 UTC (rev 619)
@@ -30,6 +30,7 @@
select OPTION_TABLE
select NORTHBRIDGE_AMD_GEODELX
select SOUTHBRIDGE_AMD_CS5536
+ select PIRQ_TABLE
help
AMD Norwich Geode LX development board.
Modified: coreboot-v3/mainboard/amd/norwich/Makefile
===================================================================
--- coreboot-v3/mainboard/amd/norwich/Makefile 2008-02-25 16:06:36 UTC (rev
618)
+++ coreboot-v3/mainboard/amd/norwich/Makefile 2008-02-25 17:20:27 UTC (rev
619)
@@ -26,7 +26,7 @@
$(src)/southbridge/amd/cs5536/smbus_initram.c \
$(src)/arch/x86/geodelx/geodelx.c
-STAGE2_MAINBOARD_OBJ =
+STAGE2_MAINBOARD_OBJ = irq_tables.o
$(obj)/coreboot.vpd:
$(Q)printf " BUILD DUMMY VPD\n"
Modified: coreboot-v3/mainboard/amd/norwich/dts
===================================================================
--- coreboot-v3/mainboard/amd/norwich/dts 2008-02-25 16:06:36 UTC (rev
618)
+++ coreboot-v3/mainboard/amd/norwich/dts 2008-02-25 17:20:27 UTC (rev
619)
@@ -20,18 +20,35 @@
/{
mainboard-vendor = "AMD";
- mainboard-name = "Norwich";
+ mainboard-name = "NORWICH";
cpus { };
[EMAIL PROTECTED] {
/config/("northbridge/amd/geodelx/apic");
};
[EMAIL PROTECTED] {
/config/("northbridge/amd/geodelx/domain");
+ /* Video RAM has to be in 2MB chunks. */
+ geode_video_mb = "8";
[EMAIL PROTECTED],0 {
/config/("northbridge/amd/geodelx/pci");
};
- [EMAIL PROTECTED],1 {
+ [EMAIL PROTECTED],0 {
/config/("southbridge/amd/cs5536/dts");
+ enable_ide = "1";
+ /* Interrupt enables for LPC bus.
+ * Each bit is an IRQ 0-15. */
+ lpc_serirq_enable = "0x00001002";
+ /* LPC IRQ polarity. Each bit is an IRQ 0-15. */
+ lpc_serirq_polarity = "0x0000EFFD";
+ /* 0:continuous 1:quiet */
+ lpc_serirq_mode = "1";
+ /* GPIO(0-0x20) for INT D:C:B:A, 0xFF=none.
+ * See virtual PIC spec. */
+ enable_gpio_int_route = "0x0D0C0700";
+ /* COM1 settings */
+ com1_enable = "1";
+ com1_address = "0x3f8";
+ com1_irq = "4";
};
};
};
Modified: coreboot-v3/mainboard/amd/norwich/initram.c
===================================================================
--- coreboot-v3/mainboard/amd/norwich/initram.c 2008-02-25 16:06:36 UTC (rev
618)
+++ coreboot-v3/mainboard/amd/norwich/initram.c 2008-02-25 17:20:27 UTC (rev
619)
@@ -31,46 +31,76 @@
#include <amd_geodelx.h>
#include <northbridge/amd/geodelx/raminit.h>
-#define MANUALCONF 0 /* Do automatic strapped PLL config. */
+/* #include <device/smbus.h>
+ * TODO: figure out how smbus functions should be done. See smbus_ops.c
+ */
+extern int smbus_read_byte(u16 device, u8 address);
-#define PLLMSRHI 0x00001490 /* Manual settings for the PLL */
+#define MANUALCONF 0 /* Do automatic strapped PLL config */
+#define PLLMSRHI 0x00001490 /* manual settings for the PLL */
#define PLLMSRLO 0x02000030
-
#define DIMM0 ((u8) 0xA0)
#define DIMM1 ((u8) 0xA2)
+u8 spd_read_byte(u16 device, u8 address)
+{
+ u8 spdbyte;
+
+ printk(BIOS_DEBUG, "spd_read_byte dev %04x\n", device);
+
+ spdbyte = smbus_read_byte(device, address);
+
+ printk(BIOS_DEBUG, " addr %02x returns %02x\n", address, spdbyte);
+
+ return spdbyte;
+}
+
/**
- * Placeholder in case we ever need it. Since this file is a template for
- * other boards, we want this here and we want the call in the right place.
- */
+ * Placeholder in case we ever need it. Since this file is a
+ * template for other motherboards, we want this here and we want the
+ * call in the right place.
+ */
+
static void mb_gpio_init(void)
{
/* Early mainboard specific GPIO setup */
}
/**
- * Main for initram for the AMD Norwich. It might seem that you could somehow
- * do these functions in, e.g., the CPU code, but the order of operations and
- * what those operations are is VERY strongly mainboard dependent. It's best to
- * leave it in the mainboard code.
- */
+ * main for initram for the AMD Norwich development platform.
+ * It might seem that you could somehow do these functions in, e.g., the cpu
+ * code, but the order of operations and what those operations are is VERY
+ * strongly mainboard dependent. It's best to leave it in the mainboard code.
+ */
int main(void)
{
- u8 smb_devices[] = { DIMM0, DIMM1 };
-
+ printk(BIOS_DEBUG, "Hi there from initram (stage1) main!\n");
post_code(POST_START_OF_MAIN);
system_preinit();
+ printk(BIOS_DEBUG, "done preinit\n");
+
mb_gpio_init();
+ printk(BIOS_DEBUG, "done gpio init\n");
+
pll_reset(MANUALCONF, PLLMSRHI, PLLMSRLO);
+ printk(BIOS_DEBUG, "done pll reset\n");
+
cpu_reg_init(0, DIMM0, DIMM1);
+ printk(BIOS_DEBUG, "done cpu reg init\n");
sdram_set_registers();
+ printk(BIOS_DEBUG, "done sdram set registers\n");
+
sdram_set_spd_registers(DIMM0, DIMM1);
+ printk(BIOS_DEBUG, "done sdram set spd registers\n");
+
sdram_enable(DIMM0, DIMM1);
+ printk(BIOS_DEBUG, "done sdram enable\n");
- /* Check low memory. */
- /* ram_check(0, 640 * 1024); */
+ /* Check low memory */
+ /*ram_check(0x00000000, 640*1024); */
+ printk(BIOS_DEBUG, "stage1 returns\n");
return 0;
}
Added: coreboot-v3/mainboard/amd/norwich/irq_tables.c
===================================================================
--- coreboot-v3/mainboard/amd/norwich/irq_tables.c
(rev 0)
+++ coreboot-v3/mainboard/amd/norwich/irq_tables.c 2008-02-25 17:20:27 UTC
(rev 619)
@@ -0,0 +1,141 @@
+/*
+* This file is part of the coreboot project.
+*
+* Copyright (C) 2007 Advanced Micro Devices, Inc.
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <types.h>
+#include <lib.h>
+#include <console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <string.h>
+#include <msr.h>
+#include <io.h>
+#include <pirq_routing.h>
+#include <amd_geodelx.h>
+#include "../../../southbridge/amd/cs5536/cs5536.h"
+
+/* Number of slots and devices in the PIR table */
+#define SLOT_COUNT 6
+
+/* Platform IRQs */
+#define PIRQA 11
+#define PIRQB 10
+#define PIRQC 11
+#define PIRQD 10
+
+/* Map */
+#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */
+#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */
+#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */
+#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */
+
+/* Link */
+#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */
+#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */
+#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */
+#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */
+
+/*
+ * Norwich interrupt wiring.
+ *
+ * Devices are:
+ *
+ * 00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion]
Host Bridge (rev 31)
+ * 00:01.1 Graphics device: Advanced Micro Devices [AMD] Geode LX Graphics
+ * 00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode
LX AES Security Block
+ * 00:0b.0 slot3
+ * 00:0c.0 slot4
+ * 00:0d.0 slot1
+ * 00:0e.0 slot2
+ * 00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion]
ISA (rev 03)
+ * 00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode
companion] IDE (rev 01)
+ * 00:0f.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536
[Geode companion] Audio (rev 01)
+ * 00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode
companion] OHC (rev 02)
+ * 00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode
companion] EHC (rev 02)
+ *
+ */
+
+const struct irq_routing_table intel_irq_routing_table = {
+ PIRQ_SIGNATURE,
+ PIRQ_VERSION,
+ 32 + 16 * SLOT_COUNT, /* Max. number of devices on the bus */
+ 0x00, /* Where the interrupt router lies (bus) */
+ (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */
+ 0x00, /* IRQs devoted exclusively to PCI usage */
+ 0x100B, /* Vendor */
+ 0x002B, /* Device */
+ 0, /* Crap (miniport) */
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */
+ 0x00, /* Checksum */
+ {
+ /* If you change the number of entries, change the IRQ_SLOT_COUNT
above! */
+ /* bus, dev|fn, {link, bitmap}, {link, bitmap},
{link, bitmap}, {link, bitmap}, slot, rfu */
+ {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00,
0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* cpu */
+ {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB},
{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */
+ {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC},
{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x1, 0x0}, /* slot1 */
+ {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD},
{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x2, 0x0}, /* slot2 */
+ {0x00, (0x0B << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA},
{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x3, 0x0}, /* slot3 */
+ {0x00, (0x0C << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB},
{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x4, 0x0}, /* slot4 */
+ }
+};
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ int i, j, k, num_entries;
+ unsigned char pirq[4];
+ u16 chipset_irq_map;
+ u32 pciAddr, pirtable_end;
+ struct irq_routing_table *pirq_tbl;
+
+ pirtable_end = copy_pirq_routing_table(addr);
+
+ /* Set up chipset IRQ steering. */
+ pciAddr = 0x80000000 | (CHIPSET_DEV_NUM << 11) | 0x5C;
+ chipset_irq_map = (PIRQD << 12 | PIRQC << 8 | PIRQB << 4 | PIRQA);
+ printk(BIOS_DEBUG, "%s(%08X, %04X)\n", __FUNCTION__, pciAddr,
+ chipset_irq_map);
+ outl(pciAddr & ~3, 0xCF8);
+ outl(chipset_irq_map, 0xCFC);
+
+ pirq_tbl = (struct irq_routing_table *) (addr);
+ num_entries = (pirq_tbl->size - 32) / 16;
+
+ /* Set PCI IRQs. */
+ for (i = 0; i < num_entries; i++) {
+ printk(BIOS_DEBUG, "PIR Entry %d Dev/Fn: %X Slot: %d\n", i,
+ pirq_tbl->slots[i].devfn, pirq_tbl->slots[i].slot);
+ for (j = 0; j < 4; j++) {
+ printk(BIOS_DEBUG, "INT: %c bitmap: %x ", 'A' + j,
+ pirq_tbl->slots[i].irq[j].bitmap);
+ /* Finds lsb in bitmap to IRQ#. */
+ for (k = 0;
+ (!((pirq_tbl->slots[i].irq[j].bitmap >> k) & 1))
+ && (pirq_tbl->slots[i].irq[j].bitmap != 0);
+ k++);
+ pirq[j] = k;
+ printk(BIOS_DEBUG, "PIRQ: %d\n", k);
+ }
+
+ /* Bus, device, slots IRQs for {A,B,C,D}. */
+ pci_assign_irqs(pirq_tbl->slots[i].bus,
+ pirq_tbl->slots[i].devfn >> 3, pirq);
+ }
+
+ /* Put the PIR table in memory and checksum. */
+ return pirtable_end;
+}
Modified: coreboot-v3/mainboard/amd/norwich/stage1.c
===================================================================
--- coreboot-v3/mainboard/amd/norwich/stage1.c 2008-02-25 16:06:36 UTC (rev
618)
+++ coreboot-v3/mainboard/amd/norwich/stage1.c 2008-02-25 17:20:27 UTC (rev
619)
@@ -40,9 +40,7 @@
/*
* NOTE: Must do this AFTER the early_setup! It is counting on some
* early MSR setup for the CS5536. We do this early for debug.
- * Real setup should be done in chipset init via Config.lb.
- *
- * TODO: Drop Config.lb reference, update comment.
+ * Real setup should be done in chipset init via dts settings.
*/
cs5536_setup_onchipuart();
}
--
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
