help?
On 6/1/08, Tiago Marques <[EMAIL PROTECTED]> wrote: > Finally had some time to test this. > The erase command does nothing, I was still able to download the full > BIOS and boot the machine. This using the latest flashrom revision. > First step is to make it erase? Where should I start? > > Best regards > > > > On 2/8/08, Carl-Daniel Hailfinger <[EMAIL PROTECTED]> wrote: > > On 29.01.2008 18:59, Tiago Marques wrote: > > > Any ideas? From where should I start? > > > > > > > > > Try to erase a chip with "flashrom -E" (just erase, no write, no verify) > > and then read back the contents with "flashrom -r". Look at the > > resulting file with xxd or hexdump and check if it is all 0xff. > > I suspect that it will not be all 0xff when erased in the problematic > > boards, but it will be all 0xff when erased in the K8T890 board. > > > > Regards, > > Carl-Daniel > > > > > > -- > > http://www.hailfinger.org/ > > > > > -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
