Sorry for posting a message that is a little bit off-topic. I'm working with a SST 8 Mbit Firmware Hub SST49LF008A flash connected to Geode LX LPC bus. I need to understand where flash registers are mapped in case the flash ID is set to 1 (this flash is not the boot flash that has ID=0). The datasheet just says about identification registers (same thing applies for other registers too):
JEDEC ID Registers The JEDEC ID registers for the boot device appear at FFBC0000H and FFBC0001H in the 4 GByte system memory map, and will appear ***elsewhere*** if the device is not the boot device. Anybody can tell me what does "elsewhere" stand for in this sentence? TIA, llandre DAVE Electronics System House - R&D Department web: http://www.dave.eu email: r&[EMAIL PROTECTED] -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
