Anyone want to try with an IDE controller in native mode? I know vt8237r can handle it, shouldn't this make it so FILO can figure it out?
-Corey On Sat, Jun 21, 2008 at 8:17 PM, Kevin O'Connor <[EMAIL PROTECTED]> wrote: > On Sat, Jun 21, 2008 at 08:06:50AM +0200, Peter Stuge wrote: >> On Fri, Jun 20, 2008 at 11:55:54PM -0500, bari wrote: >> > Peter Stuge wrote: >> > > Found a bug in the debug() calls. Fixed in the attached version. >> > >> > It works! >> >> Great! I'm looking forward to more test results. Here's a properly >> signed-off patch with some small debug message fixes and better >> explanation. >> >> Anyone else who has a board with a SATA PCI device before the >> PATA/IDE device, please test booting from PATA using this patch. >> >> It would also be interesting to boot this patch on a board with only >> PATA/IDE devices - ie. no SATA or native mode PATA. > > I can confirm that my epia-m continues to boot with a patched filo. > The epia-m has only PATA, and it is in compatibility mode. > > -Kevin > > -- > coreboot mailing list > [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot > -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
