Hi Pietro, thanks for testing my patch!
On 29.06.2008 18:25, Pietro wrote: > After applying the patch, here is the output of flashrom -V... I launched and > forgot the terminal for a while... I saw it back after an hour... > > Calibrating delay loop... 455M loops per second. OK. > No coreboot table found. > Found chipset "Intel ICH7M", enabling flash write... > Root Complex Register Block address = 0xfed1c000 > GCS address = 0xfed1f410 > GCS = 0xaa0c64: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 > (LPC) > [...] > > SPI Read Configuration: prefetching disabled, caching enabled, > BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 > OK. > Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff > [...] > Probing for Atmel AT25DF321, 4096 KB: Programming OPCODES... done > timeout > Transaction error! > run OPCODE 0x9f failed > Probing for AMIC Technology A25L40P, 512 KB: timeout > Transaction error! > run OPCODE 0x9f failed > Probing for AMIC Technology A49LF040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e > [...] > No operations were specified. > OK, that confirms Stefan's suspicion that running the opcode is the problem. Regards, Carl-Daniel -- http://www.hailfinger.org/ -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
