On Sat, Jun 28, 2008 at 11:45 AM, Kevin O'Connor <[EMAIL PROTECTED]> wrote: > Hi, > > I have successfully installed and booted win-xp with coreboot-v2 and > legacybios under qemu. Unfortunately, when I try to install or boot > win-xp with coreboot-v2 and legacybios on my via epia-m the system > hangs. > > At this point, I don't know if the problem is related to coreboot and > its epia-m support, or if it is related to legacybios. I've confirmed > that the hang does not occur inside the bios. The last thing the > install reports before hanging is "Setup is starting Windows". > > It would be helpful if others could try installing / booting win-xp > on real hardware. If you can do this, please follow the directions > at: > > http://www.coreboot.org/pipermail/coreboot/2008-June/036108.html
I must be missing something, because my boot fails with this message on my s2892: Class Code mismatch ROM 00010600, dev 00010601 copying non-VGA ROM Image from 0xfd100000 to 0xd0000, 0x5400 bytes entering emulator halt_sys: file /home/xd1000/try/buildrom/buildrom-devel/work/coreboot/svn/src/de vices/emulator/x86emu/ops.c, line 183 PCI: 05:01.0 init Devices initialized Writing IRQ routing tables to 0xdff0000...done. Wrote the mp table end at: 0dff0410 - 0dff0640 move mptable from 0x20 to 0xfffffc00, size 0xdff03e0 I'll look into it more tomorrow, but if you already know what it is that would be great. BTW: when I was trying to get XP to boot before, I was having timing problems. Have you tested the timer tick with factory BIOS and coreboot? Thanks, Myles -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
