On Mon, Jul 14, 2008 at 05:25:24PM +0200, Hannes Hegewald wrote: > Great, the irqpoll option did it!! Can we do something to make it work > even without the irqpoll option? Maybe creating a new irq_table.c ?! I > will also run getpir once more and compare the two files.
Yep, please do. If you want to hack on this you can also checkout http://www.coreboot.org/Creating_Valid_IRQ_Tables which may be useful for manually figuring out the IRQs in case the table in svn is not correct. > The minicom log is attached. > > Hannes. > > > > coreboot-2.0.0.0Normal Fr 11. Jul 18:12:37 CEST 2008 starting... > Setting up default parameters for memory > Sizing memory > Probing for DIMM0 > Found DIMM0 > Page Size: 00001000 > Component Banks: 4 > Module Banks: 2 > DIMM size: 08000000 > Probing for DIMM1 > MC_BANK_CFG = 00705520 > Copying coreboot to RAM. > Jumping to coreboot. > coreboot-2.0.0.0Normal Fr 11. Jul 18:20:47 CEST 2008 booting... > end 56bd01c6, start 0 > 32-bit delta 464 > calibrate_tsc 32-bit result is 464 > clocks_per_usec: 464 > Enumerating buses... > scan_static_bus for Root Device > northbridge.c:enable_dev() > DEVICE_PATH_PCI_DOMAIN > Finding PCI configuration type. > PCI: Using configuration type 1 > PCI_DOMAIN: 0000 enabled > PCI_DOMAIN: 0000 scanning... > PCI: pci_scan_bus for bus 00 > northbridge.c:enable_dev() > device path type 2 > PCI: 00:00.0 [1078/0001] ops > PCI: 00:00.0 [1078/0001] enabled > PCI: devfn 0x8, bad id 0xffffffff > PCI: devfn 0x10, bad id 0xffffffff > PCI: devfn 0x18, bad id 0xffffffff > PCI: devfn 0x20, bad id 0xffffffff > PCI: devfn 0x28, bad id 0xffffffff > PCI: devfn 0x30, bad id 0xffffffff > PCI: devfn 0x38, bad id 0xffffffff > PCI: devfn 0x40, bad id 0xffffffff > PCI: devfn 0x48, bad id 0xffffffff > PCI: devfn 0x50, bad id 0xffffffff > PCI: devfn 0x58, bad id 0xffffffff > PCI: devfn 0x60, bad id 0xffffffff > PCI: devfn 0x68, bad id 0xffffffff > PCI: devfn 0x70, bad id 0xffffffff > PCI: 00:0f.0 [10ec/8139] enabled > PCI: devfn 0x80, bad id 0xffffffff > PCI: devfn 0x88, bad id 0xffffffff > PCI: 00:12.0 [1078/0100] bus ops > PCI: 00:12.0 [1078/0100] enabled > PCI: 00:12.1 [1078/0101] disabled > PCI: 00:12.2 [1078/0102] bus ops > PCI: 00:12.2 [1078/0102] enabled > PCI: 00:12.3 [1078/0103] enabled > PCI: 00:12.4 [1078/0104] ops > PCI: 00:12.4 [1078/0104] enabled > PCI: devfn 0x95, bad id 0xffffffff > PCI: devfn 0x96, bad id 0xffffffff > PCI: devfn 0x97, bad id 0xffffffff > PCI: 00:13.0 [0e11/a0f8] enabled > PCI: devfn 0xa0, bad id 0xffffffff > PCI: devfn 0xa8, bad id 0xffffffff > PCI: devfn 0xb0, bad id 0xffffffff > PCI: devfn 0xb8, bad id 0xffffffff > PCI: devfn 0xc0, bad id 0xffffffff > PCI: devfn 0xc8, bad id 0xffffffff > PCI: devfn 0xd0, bad id 0xffffffff > PCI: devfn 0xd8, bad id 0xffffffff > PCI: devfn 0xe0, bad id 0xffffffff > PCI: devfn 0xe8, bad id 0xffffffff > PCI: devfn 0xf0, bad id 0xffffffff > PCI: devfn 0xf8, bad id 0xffffffff > scan_static_bus for PCI: 00:12.0 > malloc Enter, size 1100, free_mem_ptr 0001a000 > malloc 0x0001a000 > PNP: 002e.0 disabled > PNP: 002e.1 enabled > PNP: 002e.2 enabled > PNP: 002e.e enabled > PNP: 002e.4 enabled > PNP: 002e.5 enabled > PNP: 002e.6 enabled > PNP: 002e.7 enabled > PNP: 002e.8 enabled > PNP: 002e.3 enabled > scan_static_bus for PCI: 00:12.0 done > scan_static_bus for PCI: 00:12.2 > scan_static_bus for PCI: 00:12.2 done > PCI: pci_scan_bus returning with max=000 > scan_static_bus for Root Device done > done > Allocating resources... > Reading resources... > Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: > 0 > Root Device read_resources bus 0 link: 0 > northbridge.c:pci_domain_read_resources() > PCI_DOMAIN: 0000 read_resources bus 0 link: 0 > PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done > Root Device read_resources bus 0 link: 0 done > PCI: 00:0f.0 10 * [0x00000400 - 0x000004ff] io > PCI: 00:12.2 20 * [0x00000800 - 0x0000087f] io > Root Device compute_allocate_io: base: 00000880 size: 00000480 align: 8 gran: > 0 done > Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 > gran: 0 > Root Device read_resources bus 0 link: 0 > Root Device read_resources bus 0 link: 0 done > PCI: 00:12.4 10 * [0x00000000 - 0x00000fff] mem > PCI: 00:13.0 10 * [0x00001000 - 0x00001fff] mem > PCI: 00:0f.0 14 * [0x00002000 - 0x000020ff] mem > PCI: 00:12.3 10 * [0x00003000 - 0x0000307f] mem > Root Device compute_allocate_mem: base: 00003080 size: 00003080 align: 12 > gran: 0 done > Done reading resources. > Setting resources... > Root Device compute_allocate_io: base: 00001000 size: 00000480 align: 8 gran: > 0 > Root Device read_resources bus 0 link: 0 > Root Device read_resources bus 0 link: 0 done > PCI: 00:0f.0 10 * [0x00001000 - 0x000010ff] io > PCI: 00:12.2 20 * [0x00001400 - 0x0000147f] io > Root Device compute_allocate_io: base: 00001480 size: 00000480 align: 8 gran: > 0 done > Root Device compute_allocate_mem: base: febfc000 size: 00003080 align: 12 > gran: 0 > Root Device read_resources bus 0 link: 0 > Root Device read_resources bus 0 link: 0 done > PCI: 00:12.4 10 * [0xfebfc000 - 0xfebfcfff] mem > PCI: 00:13.0 10 * [0xfebfd000 - 0xfebfdfff] mem > PCI: 00:0f.0 14 * [0xfebfe000 - 0xfebfe0ff] mem > PCI: 00:12.3 10 * [0xfebff000 - 0xfebff07f] mem > Root Device compute_allocate_mem: base: febff080 size: 00003080 align: 12 > gran: 0 done > Root Device assign_resources, bus 0 link: 0 > BC_DRAM_TOP = 0x07dfffff > MC_GBASE_ADD = 0x000000fc > I would set ram size to 126 Mbytes > PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 > PCI: 00:0f.0 10 <- [0x0000001000 - 0x00000010ff] size 0x00000100 gran 0x08 io > PCI: 00:0f.0 14 <- [0x00febfe000 - 0x00febfe0ff] size 0x00000100 gran 0x08 mem > PCI: 00:12.2 20 <- [0x0000001400 - 0x000000147f] size 0x00000080 gran 0x07 io > PCI: 00:12.3 10 <- [0x00febff000 - 0x00febff07f] size 0x00000080 gran 0x07 mem > PCI: 00:12.4 10 <- [0x00febfc000 - 0x00febfcfff] size 0x00001000 gran 0x0c mem > PCI: 00:13.0 10 <- [0x00febfd000 - 0x00febfdfff] size 0x00001000 gran 0x0c mem > PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 > Root Device assign_resources, bus 0 link: 0 > Done setting resources. > Done allocating resources. > Enabling resources... > PCI: 00:00.0 cmd <- 07 > PCI: 00:0f.0 subsystem <- 00/00 > PCI: 00:0f.0 cmd <- 03 > PCI: 00:12.0 cmd <- 0f > PNP: 002e.e missing enable_resources > PCI: 00:12.2 cmd <- 01 > PCI: 00:12.3 subsystem <- 00/00 > PCI: 00:12.3 cmd <- 02 > PCI: 00:12.4 cmd <- 02 > PCI: 00:13.0 subsystem <- 00/00 > PCI: 00:13.0 cmd <- 02 > done. > Initializing devices... > Root Device init > PCI: 00:00.0 init > northbridge: northbridge_init() > Calling enable_cache() > PCI: 00:0f.0 init > PCI: 00:12.0 init > PNP: 002e.1 init > PNP: 002e.2 init > PNP: 002e.4 init > PNP: 002e.5 init > PNP: 002e.6 init > Keyboard init... > PNP: 002e.7 init > PNP: 002e.8 init > PCI: 00:12.2 init > Primary IDE interface enabled > Secondary IDE interface disabled > PCI: 00:12.3 init > PCI: 00:12.4 init > Setting up video mode 640x480 with 31500000 Hz clock > PCI: 00:13.0 init > PNP: 002e.3 init > Devices initialized > Copying IRQ routing tables to 0xf0000...done. > Verifing copy of IRQ routing tables at 0xf0000...done > Checking IRQ routing table consistency... > check_pirq_routing_table() - irq_routing_table located at: 0x000f0000 > done. > PIR Entry 0 Dev/Fn: 7 Slot: 1 > INT: A link: 2 bitmap: deb8 IRQ: 3 > INT: B link: 3 bitmap: deb8 IRQ: 4 > INT: C link: 4 bitmap: deb8 IRQ: 5 > INT: D link: 1 bitmap: deb8 IRQ: 7 > PIR Entry 1 Dev/Fn: F Slot: 2 > INT: A link: 3 bitmap: deb8 IRQ: 4 > INT: B link: 4 bitmap: deb8 IRQ: 5 > INT: C link: 1 bitmap: deb8 IRQ: 7 > INT: D link: 2 bitmap: deb8 IRQ: 3 > Assigning IRQ 4 to 0:f.0 > Readback = 4 > pci_level_irq: current ints are 0x0 > pci_level_irq: try to set ints 0x10 > PIR Entry 2 Dev/Fn: 13 Slot: 0 > INT: A link: 1 bitmap: deb8 IRQ: 7 > INT: B link: 0 bitmap: deb8 not routed > INT: C link: 0 bitmap: deb8 not routed > INT: D link: 0 bitmap: deb8 not routed > Assigning IRQ 7 to 0:13.0 > Readback = 7 > pci_level_irq: current ints are 0x10 > pci_level_irq: try to set ints 0x90 > PIRQ1: 7 > PIRQ2: 3 > PIRQ3: 4 > PIRQ4: 5 > Moving GDT to 0x500...ok > Adjust low_table_end from 0x00000530 to 0x00001000 > Adjust rom_table_end from 0x000f0400 to 0x00100000 > Wrote coreboot table at: 00000530 - 00000748 checksum e10a > > Welcome to elfboot, the open sourced starter. > January 2002, Eric Biederman. > Version 1.3 > > rom_stream: 0xfffc0000 - 0xfffcffff > Found ELF candidate at offset 0 > header_offset is 0 > Try to load at offset 0x0 > malloc Enter, size 32, free_mem_ptr 0001a44c > malloc 0x0001a44c > New segment addr 0x100000 size 0x33ae0 offset 0xc0 filesize 0xa648 > (cleaned up) New segment addr 0x100000 size 0x33ae0 offset 0xc0 filesize > 0xa648 > lb: [0x0000000000004000, 0x000000000001e000) > malloc Enter, size 32, free_mem_ptr 0001a46c > malloc 0x0001a46c > New segment addr 0x133ae0 size 0x48 offset 0xa720 filesize 0x48 > (cleaned up) New segment addr 0x133ae0 size 0x48 offset 0xa720 filesize 0x48 > lb: [0x0000000000004000, 0x000000000001e000) > Dropping non PT_LOAD segment > Dropping non PT_LOAD segment > Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000033ae0 filesz: > 0x000000000000a648 > [ 0x0000000000100000, 000000000010a648, 0x0000000000133ae0) <- > 00000000000000c0 > Clearing Segment: addr: 0x000000000010a648 memsz: 0x0000000000029498 > Loading Segment: addr: 0x0000000000133ae0 memsz: 0x0000000000000048 filesz: > 0x0000000000000048 > [ 0x0000000000133ae0, 0000000000133b28, 0x0000000000133b28) <- > 000000000000a720 > Loaded segments > verified segments > closed down stream > Jumping to boot code at 0x10854c > entry = 0x0010854c > lb_start = 0x00004000 > lb_size = 0x0001a000 > adjust = 0x07de2000 > buffer = 0x07dcc000 > elf_boot_notes = 0x00014140 > adjusted_boot_notes = 0x07df6140 > FILO version 0.5.5 ([EMAIL PROTECTED]) Fri Jul 11 18:19:27 CEST 2008 > boot: hda1:/boot/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200 > irqpoll > hda: LBA 80GB: MAXTOR 6L080J4 > Mounted EXT2 filesystem > Found Linux version 2.6.24.4 ([EMAIL PROTECTED]) #2 SMP Fri May 23 11:56:57 > CEST 2008 bzImage. > Loading kernel... ok > Jumping to entry point... > Linux version 2.6.24.4 ([EMAIL PROTECTED]) (gcc version 4.2.4 (CRUX)) #2 SMP > Fri May 23 11:56:57 CEST 2008 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) > BIOS-e820: 0000000000100000 - 0000000007e00000 (usable) > 126MB LOWMEM available. > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 32256 > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0 -> 32256 > DMI not present or invalid. > Allocating PCI resources starting at 10000000 (gap: 07e00000:f8200000) > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32004 > Kernel command line: root=/dev/hda1 console=tty0 console=ttyS0,115200 irqpoll > Misrouted IRQ fixup and polling support enabled > This may significantly impact system performance > No local APIC present or hardware disabled > Initializing CPU#0 > PID hash table entries: 512 (order: 9, 2048 bytes) > Detected 300.677 MHz processor. > Console: colour dummy device 80x25 > console [tty0] enabled > console [ttyS0] enabled > Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) > Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) > Memory: 123264k/129024k available (2644k kernel code, 5260k reserved, 888k > data, 208k init, 0k highmem) > virtual kernel memory layout: > fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB) > vmalloc : 0xc8800000 - 0xfffb3000 ( 887 MB) > lowmem : 0xc0000000 - 0xc7e00000 ( 126 MB) > .init : 0xc047a000 - 0xc04ae000 ( 208 kB) > .data : 0xc03950d0 - 0xc04732f4 ( 888 kB) > .text : 0xc0100000 - 0xc03950d0 (2644 kB) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay using timer specific routine.. 626.79 BogoMIPS (lpj=1253584) > Mount-cache hash table entries: 512 > Working around Cyrix MediaGX virtual DMA bugs. > Enable Memory-Write-back mode on Cyrix/NSC processor. > Enable Memory access reorder on Cyrix/NSC processor. > Enable Incrementor on Cyrix/NSC processor. > Compat vDSO mapped to ffffe000. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > Freeing SMP alternatives: 14k freed > ACPI: Core revision 20070126 > ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace > from ACPI tables [20070126] > ACPI: Unable to load the System Description Tables > CPU0: NSC Geode(TM) Integrated Processor by National Semi stepping 02 > SMP motherboard not detected. > Local APIC not detected. Using dummy APIC emulation. > Brought up 1 CPUs > net_namespace: 64 bytes > NET: Registered protocol family 16 > EISA bus registered > PCI: Using configuration type 1 > Setting up standard PCI resources > ACPI: Interpreter disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI: disabled > SCSI subsystem initialized > PCI: Probing PCI hardware > PCI: Using IRQ router NatSemi [1078/0100] at 0000:00:12.0 > Time: tsc clocksource has been installed. > NET: Registered protocol family 2 > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > TCP established hash table entries: 4096 (order: 3, 32768 bytes) > TCP bind hash table entries: 4096 (order: 3, 32768 bytes) > TCP: Hash tables configured (established 4096 bind 4096) > TCP reno registered > microcode: CPU0 not a capable Intel processor > IA-32 Microcode Update Driver: v1.14a <[EMAIL PROTECTED]> > JFS: nTxBlock = 964, nTxLock = 7712 > SGI XFS with ACLs, security attributes, realtime, large block numbers, no > debug enabled > SGI XFS Quota Management subsystem > io scheduler noop registered > io scheduler deadline registered (default) > PCI: Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x10) > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > loop: module loaded > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > CS5530: IDE controller (0x1078:0x0102 rev 0x00) at PCI slot 0000:00:12.2 > CS5530: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:pio, hdb:pio > ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio > Clocksource tsc unstable (delta = -161502172 ns) > Time: pit clocksource has been installed. > hda: MAXTOR 6L080J4, ATA DISK drive > hda: UDMA/33 mode selected > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hda: max request size: 128KiB > hda: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63 > hda: cache flushes supported > hda: hda1 hda2 hda3 > Driver 'sd' needs updating - please use bus_type methods > Driver 'sr' needs updating - please use bus_type methods > Fusion MPT base driver 3.04.06 > Copyright (c) 1999-2007 LSI Corporation > Fusion MPT SPI Host driver 3.04.06 > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > EISA: Probing bus 0 at eisa.0 > Cannot allocate resource for EISA slot 1 > EISA: Detected 0 cards. > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Using IPI No-Shortcut mode > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 208k freed > INIT: version 2.86 booting > The system is coming up. Please wait. > 8139too Fast Ethernet driver 0.9.28 > PCI: Found IRQ 5 for device 0000:00:0f.0 > IRQ routing conflict for 0000:00:0f.0, have irq 4, want irq 5 > eth0: RealTek RTL8139 at 0xc88a4000, 00:e0:c5:6e:52:16, IRQ 4 > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) > PCI: Found IRQ 3 for device 0000:00:13.0 > IRQ routing conflict for 0000:00:13.0, have irq 7, want irq 3 > ohci_hcd 0000:00:13.0: OHCI Host Controller > ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 > ohci_hcd 0000:00:13.0: irq 7, io mem 0xfebfd000 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > /dev/hda1 has gone 25809 days without being checked, check forced. > /sbin/fsck.xfs: XFS file system. > EXT3 FS on hda1, internal journal > XFS mounting filesystem hda2 > Adding 265064k swap on /dev/hda3. Priority:-1 extents:1 across:265064k > hostname: crux > font: default > keyboard: de-latin1 > INIT: Entering runlevel: 2 > starting services: sysklogd net fcron sshd samba led > > > CRUX (crux) (ttyS0) > > crux login: root > Password: Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
