Patch attached.

//Peter
flashrom: Winbond W39V040C and MSI K8T Neo2-F

W39V040C does standard JEDEC commands except chip erase so add a small driver.
probe_w39v040c() prints the block lock pin status when a chip is found.

The Neo2 board enable matches on 8237-internal IDE and onboard NIC PCI IDs.

Many thanks to Danile McLellan for testing all of this on hardware!

Signed-off-by: Peter Stuge <[EMAIL PROTECTED]>

Index: flash.h
===================================================================
--- flash.h	(revision 3418)
+++ flash.h	(working copy)
@@ -517,6 +517,11 @@
 int erase_sst_fwhub(struct flashchip *flash);
 int write_sst_fwhub(struct flashchip *flash, uint8_t *buf);
 
+/* w39v040c.c */
+int probe_w39v040c(struct flashchip *flash);
+int erase_w39v040c(struct flashchip *flash);
+int write_w39v040c(struct flashchip *flash, uint8_t *buf);
+
 /* w39V080fa.c */
 int probe_winbond_fwhub(struct flashchip *flash);
 int erase_winbond_fwhub(struct flashchip *flash);
Index: flashchips.c
===================================================================
--- flashchips.c	(revision 3418)
+++ flashchips.c	(working copy)
@@ -132,6 +132,7 @@
 	{"Winbond",	"W29EE011",		WINBOND_ID,	W_29C011,		128,	128,		TEST_OK_PREW,	probe_w29ee011,		erase_chip_jedec,		write_jedec},
 	{"Winbond",	"W39V040A",		WINBOND_ID,	W_39V040A,		512,	64*1024,	TEST_UNTESTED,	probe_jedec,		erase_chip_jedec,		write_39sf020},
 	{"Winbond",	"W39V040B",		WINBOND_ID,	W_39V040B,		512,	64*1024,	TEST_OK_PREW,	probe_jedec,		erase_chip_jedec,		write_39sf020},
+	{"Winbond",	"W39V040C",		0xda,		0x50,			512,	64*1024,	TEST_OK_PREW,	probe_w39v040c,		erase_w39v040c,			write_w39v040c},
 	{"Winbond",	"W39V040FA",		WINBOND_ID,	W_39V040FA,		512,	64*1024,	TEST_OK_PR,	probe_jedec,		erase_chip_jedec,		write_39sf020},
 	{"Winbond",	"W39V080A",		WINBOND_ID,	W_39V080A,		1024,	64*1024,	TEST_OK_PREW,	probe_jedec,		erase_chip_jedec,		write_39sf020},
 	{"Winbond",	"W49F002U",		WINBOND_ID,	W_49F002U,		256,	128,		TEST_OK_PREW,	probe_jedec,		erase_chip_jedec,		write_49f002},
Index: Makefile
===================================================================
--- Makefile	(revision 3418)
+++ Makefile	(working copy)
@@ -29,7 +29,7 @@
 	w49f002u.o 82802ab.o pm49fl00x.o sst49lf040.o \
 	sst49lfxxxc.o sst_fwhub.o layout.o cbtable.o flashchips.o \
 	flashrom.o w39v080fa.o sharplhf00l04.o w29ee011.o spi.o it87spi.o \
-	ichspi.o
+	ichspi.o w39v040c.o
 
 all: pciutils dep $(PROGRAM)
 
Index: w39v040c.c
===================================================================
--- w39v040c.c	(revision 0)
+++ w39v040c.c	(revision 0)
@@ -0,0 +1,95 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2008 Peter Stuge <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <stdio.h>
+#include "flash.h"
+
+int probe_w39v040c(struct flashchip *flash) {
+	volatile uint8_t *bios = flash->virtual_memory;
+	uint8_t id1, id2, lock;
+
+	*(volatile uint8_t *)(bios + 0x5555) = 0xAA;
+	myusec_delay(10);
+	*(volatile uint8_t *)(bios + 0x2AAA) = 0x55;
+	myusec_delay(10);
+	*(volatile uint8_t *)(bios + 0x5555) = 0x90;
+	myusec_delay(10);
+
+	id1 = *(volatile uint8_t *)bios;
+	id2 = *(volatile uint8_t *)(bios + 1);
+	lock = *(volatile uint8_t *)(bios + 0xfff2);
+
+	*(volatile uint8_t *)(bios + 0x5555) = 0xAA;
+	myusec_delay(10);
+	*(volatile uint8_t *)(bios + 0x2AAA) = 0x55;
+	myusec_delay(10);
+	*(volatile uint8_t *)(bios + 0x5555) = 0xF0;
+	myusec_delay(40);
+
+	printf_debug("%s: id1 0x%x, id2 0x%x", __func__, id1, id2);
+	if (!oddparity(id1))
+		printf_debug(", id1 parity violation");
+	printf_debug("\n");
+	if (flash->manufacture_id == id1 && flash->model_id == id2) {
+		printf("%s: Boot block #TBL is %slocked, rest of chip #WP is %slocked.\n",
+			__func__, lock & 0x4 ? "" : "un", lock & 0x8 ? "" : "un");
+		return 1;
+	}
+
+	return 0;
+}
+
+int erase_w39v040c(struct flashchip *flash) {
+	int i;
+	unsigned int total_size = flash->total_size * 1024;
+	volatile uint8_t *bios = flash->virtual_memory;
+
+	for (i = 0; i < total_size; i += flash->page_size)
+		erase_sector_jedec(flash->virtual_memory, i);
+
+	for (i = 0; i < total_size; i++)
+		if (0xff != bios[i]) {
+			printf("ERASE FAILED at 0x%08x!  Expected=0xff, Read=0x%02x\n", i, bios[i]);
+			return -1;
+		}
+
+	return 0;
+}
+
+int write_w39v040c(struct flashchip *flash, uint8_t *buf) {
+	int i;
+	int total_size = flash->total_size * 1024;
+	int page_size = flash->page_size;
+	volatile uint8_t *bios = flash->virtual_memory;
+
+	if (flash->erase(flash))
+		return -1;
+
+	printf("Programming page: ");
+	for (i = 0; i < total_size / page_size; i++) {
+		printf("%04d at address: 0x%08x", i, i * page_size);
+		write_sector_jedec(bios, buf + i * page_size,
+				   bios + i * page_size, page_size);
+		printf("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b");
+	}
+	printf("\n");
+
+	return 0;
+}
Index: board_enable.c
===================================================================
--- board_enable.c	(revision 3418)
+++ board_enable.c	(working copy)
@@ -141,6 +141,10 @@
 	return 0;
 }
 
+static int w83627thf_gpio4_4_raise_2e(const char *name) {
+	return w83627thf_gpio4_4_raise(0x2e, name);
+}
+
 static int w83627thf_gpio4_4_raise_4e(const char *name)
 {
 	return w83627thf_gpio4_4_raise(0x4e, name);
@@ -617,6 +621,8 @@
  	 NULL, NULL, "BioStar P4M80-M4", board_biostar_p4m80_m4},
  	{0x1106, 0x3227, 0x1458, 0x5001, 0x10ec, 0x8139, 0x1458, 0xe000,
  	 NULL, NULL, "GIGABYTE GA-7VT600", board_biostar_p4m80_m4},
+	{0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c,
+	 NULL, NULL, "MSI K8T Neo2", w83627thf_gpio4_4_raise_2e},
 	{0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL}	/* Keep this */
 };
 
--
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to