Hi Myles, On Fri, Jul 25, 2008 at 03:58:05PM -0600, Myles Watson wrote: > Just for the fun of it I tried installing XP with the old Bochs BIOS and > then booting it with SeaBIOS. It installs fine, then can't boot with either > BIOS. With SeaBIOS, it blue screens with the same message as the install > CD. Here's the log:
The log looks like a CD boot log - was it the same for the hd boot? A couple of notes: A "STOP: 0x0000007B" message is an INACCESSIBLE_BOOT_DEVICE error according to: http://blogs.technet.com/asksbs/archive/2008/03/30/how-to-troubleshoot-the-stop-error-0x0000007b.aspx I did notice that the last log message always seems to be: > fail floppy_13XX:709(00000001): > a=00001507 b=00000003 c=0000000f d=00065000 si=00005026 di=00000000 > ds=00001a49 es=0000504a ip=000055be cs=00001000 f=00000212 r=00000c02 you could try enabling the CONFIG_FLOPPY_SUPPORT on your machine. If that doesn't work, you could try just enabling a floppy_1315() handler that always sets regs->ah=0 and calls set_success(). Another thing to try would be to set DEBUG_HDL_13 and DEBUG_HDL_40 to 1 so that you see every call into the bios disk handlers. BTW, what are you using to log the output from serial? If something is sending backspaces - is there a way to capture that? Also, you reported that Bochs 1.186 is working with ADLO. Does a more recent version of Bochs also work? The seabios code is basically in synch with the latest bochs (v1.211). I wish there was more help I could give; unfortunately I'm seeing a totally different set of failures here. :-( -Kevin -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
