The Geode LX RAMinit code already has textual register names in the
debug routine. Use them for printout.
Signed-off-by: Carl-Daniel Hailfinger <[EMAIL PROTECTED]>
Index: LinuxBIOSv3-dbe62/northbridge/amd/geodelx/raminit.c
===================================================================
--- LinuxBIOSv3-dbe62/northbridge/amd/geodelx/raminit.c (Revision 707)
+++ LinuxBIOSv3-dbe62/northbridge/amd/geodelx/raminit.c (Arbeitskopie)
@@ -41,7 +41,6 @@
* compare to a factory BIOS setting.
* @param level printk level
*/
-
void dumplxmsrs(void)
{
const static unsigned long msrs[] = {
@@ -64,13 +63,15 @@
};
int i;
- for(i = 0; i < sizeof(msrs)/sizeof(msrs[0]); i++){
+ for (i = 0; i < ARRAY_SIZE(msrs); i++) {
struct msr msr;
msr = rdmsr(msrs[i]);
- printk(BIOS_DEBUG, "(%lx): %x.%x\n", msrs[i], msr.hi, msr.lo);
+ printk(BIOS_DEBUG, "%s (%lx): %x.%x\n", msrnames[i], msrs[i],
+ msr.hi, msr.lo);
}
}
+
/**
* Halt and Catch Fire. Print an error, then loop, sending NULLs on
* serial port, to ensure the message is visible.
--
http://www.hailfinger.org/
--
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
