On 19/08/08 19:27 +0200, Stefan Reinauer wrote:
> 
> -- 
> coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
>       Tel.: +49 761 7668825 • Fax: +49 761 7664613
> Email: [EMAIL PROTECTED]  • http://www.coresystems.de/
> Registergericht: Amtsgericht Freiburg • HRB 7656
> Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866
> 

> * add readline()
> * add fatal()
> 
> Signed-off-by: Stefan Reinauer <[EMAIL PROTECTED]>
> Signed-off-by: Patrick Georgi <[EMAIL PROTECTED]>
Acked-by: Jordan Crouse <[EMAIL PROTECTED]>

> 
> Index: include/libpayload.h
> ===================================================================
> --- include/libpayload.h      (revision 3519)
> +++ include/libpayload.h      (working copy)
> @@ -293,5 +293,10 @@
>  /* i386/util.S */
>  #define abort() halt()
>  void halt(void) __attribute__ ((noreturn));
> +void fatal(const char* msg) __attribute__ ((noreturn));
> +
> +/* libc/readline.c */
> +char * readline(const char * prompt);
> +int getline(char *buffer, int len)
>  
>  #endif
> Index: libc/readline.c
> ===================================================================
> --- libc/readline.c   (revision 0)
> +++ libc/readline.c   (revision 0)
> @@ -0,0 +1,150 @@
> +/*
> + * This file is part of the libpayload project.
> + *
> + * Copyright (C) 2008 coresystems GmbH
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + *    notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + *    notice, this list of conditions and the following disclaimer in the
> + *    documentation and/or other materials provided with the distribution.
> + * 3. The name of the author may not be used to endorse or promote products
> + *    derived from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
> + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> + * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
> + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
> + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
> + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> + * SUCH DAMAGE.
> + */
> +
> +#include <libpayload.h>
> +
> +static char * readline_buffer;
> +static int readline_bufferlen;
> +
> +/**
> + * This readline implementation is rather simple, but it does more than the
> + * original readline() because it allows us to have a pre-filled buffer. To
> + * pre-fill the buffer, use the getline() function.
> + */
> +char * readline(const char * prompt)
> +{
> +     char *buffer;
> +     int current, ch, nonspace_seen;
> +
> +     if (!readline_buffer || !readline_bufferlen) {
> +#define READLINE_BUFFERSIZE  256
> +             readline_buffer = malloc(READLINE_BUFFERSIZE);
> +             readline_bufferlen = READLINE_BUFFERSIZE;
> +             memset(readline_buffer, 0, readline_bufferlen);
> +     }
> +
> +     buffer = readline_buffer;
> +     
> +     /* print prompt */
> +     if (prompt) {
> +             current = 0;
> +             while (prompt[current]) {
> +                     putchar(prompt[current]);
> +                     current++;
> +             }
> +     }
> +
> +     /* print existing buffer, if there is one */
> +     current = 0;
> +     while (buffer[current]) {
> +             putchar(buffer[current]);
> +             current++;
> +     }
> +
> +     while (1) {
> +             ch = getchar();
> +             switch (ch) {
> +             case '\r':
> +             case '\n':
> +                     /* newline */
> +                     putchar('\n');
> +                     goto out;
> +             case '\b':
> +             case '\x7f':
> +                     /* backspace */
> +                     if (current > 0) {
> +                             putchar('\b');
> +                             putchar(' ');
> +                             putchar('\b');
> +                             current--;
> +                     }
> +                     break;
> +             case 'W' & 0x1f:        /* CTRL-W */
> +                     /* word erase */
> +                     nonspace_seen = 0;
> +                     while (current) {
> +                             if (buffer[current - 1] != ' ')
> +                                     nonspace_seen = 1;
> +                             putchar('\b');
> +                             putchar(' ');
> +                             putchar('\b');
> +                             current--;
> +                             if (nonspace_seen && (current < 
> readline_bufferlen - 1)
> +                                 && (current > 0) && (buffer[current - 1] == 
> ' '))
> +                                     break;
> +                     }
> +                     break;
> +             case 'U' & 0x1f:        /* CTRL-U */
> +                     /* line erase */
> +                     while (current) {
> +                             putchar('\b');
> +                             putchar(' ');
> +                             putchar('\b');
> +                             current--;
> +                     }
> +                     current = 0;
> +                     break;
> +             default:
> +                     /* all other characters */
> +
> +                     /* ignore control characters */
> +                     if (ch < 0x20)
> +                             break;
> +
> +                     /* ignore unprintables */
> +                     if (ch >= 0x7f)
> +                             break;
> +
> +                     if (current + 1 < readline_bufferlen) {
> +                             /* print new character */
> +                             putchar(ch);
> +                             /* and add it to the array */
> +                             buffer[current] = ch;
> +                             current++;
> +                     }
> +             }
> +     }
> +
> +
> +out:
> +     if (current >= readline_bufferlen)
> +             current = readline_bufferlen - 1;
> +     buffer[current] = '\0';
> +
> +     return buffer;
> +}
> +
> +int getline(char *buffer, int len)
> +{
> +     readline_buffer = buffer;
> +     readline_bufferlen = len;
> +     readline(NULL);
> +     return strlen(buffer);
> +}
> +
> Index: libc/Makefile.inc
> ===================================================================
> --- libc/Makefile.inc (revision 3519)
> +++ libc/Makefile.inc (working copy)
> @@ -31,3 +31,4 @@
>  TARGETS-$(CONFIG_LIBC) += libc/malloc.o libc/printf.o libc/console.o 
> libc/string.o
>  TARGETS-$(CONFIG_LIBC) += libc/memory.o libc/ctype.o libc/ipchecksum.o 
> libc/lib.o
>  TARGETS-$(CONFIG_LIBC) += libc/rand.o libc/time.o libc/lar.o libc/exec.o
> +TARGETS-$(CONFIG_LIBC) += libc/readline.o
> Index: libc/lib.c
> ===================================================================
> --- libc/lib.c        (revision 3519)
> +++ libc/lib.c        (working copy)
> @@ -101,3 +101,15 @@
>               ('A' <= h && h <= 'F') ? (h - 'A' + 10) : \
>               ('a' <= h && h <= 'f') ? (h - 'a' + 10) : 0);
>  }
> +
> +/**
> + * Enters HALT state, after printing msg
> + *
> + * @param msg message to print
> + */
> +void fatal(const char *msg)
> +{
> +     printf("%s",msg);
> +     halt();
> +}
> +

> --
> coreboot mailing list
> [email protected]
> http://www.coreboot.org/mailman/listinfo/coreboot


-- 
Jordan Crouse
Systems Software Development Engineer 
Advanced Micro Devices, Inc.


--
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to