Kevin,
> On Tue, Aug 19, 2008 at 04:54:55PM -0600, Myles Watson wrote: > > It changed the behavior for me for XP installation. Now I get "Hardware > > Malfunction Contact your hardware vendor for support." > > Well, I guess that's progress. :-/ Does it fail after a while, or > right at the start? You got through the install with bochs bios, > right? It fails at the "Setup is Starting Windows" screen. It flashes the screen, then gives the failure message. That's right, I got through the install with the original Bochs BIOS, but without any of the 32-bit or PCI functions. > > > > I used 6 for the number of PCI buses. > [...] > > PCI: 07:09.1 [14e4/1648] enabled > > I think you want to set CONFIG_PCI_BUS_COUNT to 8 - it should be one > more than your largest bus number. I didn't look closely enough. Thanks for pointing that out. The largest I saw was 5. > > It still hangs in the same place for ReactOS. It wants me to press > enter to > > continue, but it's frozen. > > Hrmm. Does the bios keyboard support work at all? If you use a > freedos CD, can you type in dos commands? It works enough for me to select items from the boot menu. I'll try freedos. > Have you been able to confirm that reactos works on your machine with > a different bios? I don't have a different BIOS, but ReactOS works in QEMU fine. It's possible that the freeze is not related to the keyboard, it just happens to be what's on the screen. Thanks, Myles -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
