Author: rminnich
Date: 2008-08-28 04:35:56 +0200 (Thu, 28 Aug 2008)
New Revision: 836
Added:
coreboot-v3/arch/x86/amd/model_fxx/dualcore_id.c
Modified:
coreboot-v3/arch/x86/amd/model_fxx/init_cpus.c
coreboot-v3/mainboard/amd/serengeti/mainboard.h
Log:
This code is not in a working state but I want to get it into the repo
since the box it is on is kinda old.
I realize it is wrong but it is getting there.
The k8 startup is a work of genius. I hope at some point it will be a
work of genius that the rest of us can understand :-)
But it's very impressive code in how it works.
Signed-off-by: Ronald G. Minnich <[EMAIL PROTECTED]>
Acked-by: Ronald G. Minnich <[EMAIL PROTECTED]>
Added: coreboot-v3/arch/x86/amd/model_fxx/dualcore_id.c
===================================================================
--- coreboot-v3/arch/x86/amd/model_fxx/dualcore_id.c
(rev 0)
+++ coreboot-v3/arch/x86/amd/model_fxx/dualcore_id.c 2008-08-28 02:35:56 UTC
(rev 836)
@@ -0,0 +1,52 @@
+/* We need to get a unified Id that works on dual, quad, whatever. We are
going to leave
+ * this as-is and fix later, working with AMD to improve it.
+ */
+
+/* 2004.12 yhlu add dual core support */
+
+//called by bus_cpu_scan too
+unsigned int read_nb_cfg_54(void)
+{
+ msr_t msr;
+ msr = rdmsr(NB_CFG_MSR);
+ return ( ( msr.hi >> (54-32)) & 1);
+}
+
+unsigned get_initial_apicid(void)
+{
+ return ((cpuid_ebx(1) >> 24) & 0xf);
+}
+
+//called by amd_siblings too
+#define CORE_ID_BIT 1
+#define NODE_ID_BIT 3
+struct node_core_id get_node_core_id(unsigned nb_cfg_54)
+{
+ struct node_core_id id;
+ // get the apicid via cpuid(1) ebx[27:24]
+ if( nb_cfg_54) {
+ // when NB_CFG[54] is set, nodeid = ebx[27:25], coreid =
ebx[24]
+ id.coreid = (cpuid_ebx(1) >> 24) & 0xf;
+ id.nodeid = (id.coreid>>CORE_ID_BIT);
+ id.coreid &= ((1<<CORE_ID_BIT)-1);
+ }
+ else
+ {
+ // when NB_CFG[54] is clear, nodeid = ebx[26:24], coreid =
ebx[27]
+ id.nodeid = (cpuid_ebx(1) >> 24) & 0xf;
+ id.coreid = (id.nodeid>>NODE_ID_BIT);
+ id.nodeid &= ((1<<NODE_ID_BIT)-1);
+ }
+ return id;
+}
+
+inline unsigned get_core_num(void)
+{
+ return (cpuid_ecx(0x80000008) & 0xff);
+}
+
+inline struct node_core_id get_node_core_id_x(void) {
+
+ return get_node_core_id( read_nb_cfg_54() ); // for pre_e0() nb_cfg_54
always be 0
+}
+
Modified: coreboot-v3/arch/x86/amd/model_fxx/init_cpus.c
===================================================================
--- coreboot-v3/arch/x86/amd/model_fxx/init_cpus.c 2008-08-28 02:32:27 UTC
(rev 835)
+++ coreboot-v3/arch/x86/amd/model_fxx/init_cpus.c 2008-08-28 02:35:56 UTC
(rev 836)
@@ -38,33 +38,33 @@
#define K8_SET_FIDVID 1
#ifndef K8_SET_FIDVID_CORE0_ONLY
- /* MSR FIDVID_CTL and FIDVID_STATUS are shared by cores, so may don't
need to do twice*/
- #define K8_SET_FIDVID_CORE0_ONLY 1
+ /* MSR FIDVID_CTL and FIDVID_STATUS are shared by cores, so may don't
need to do twice */
+#define K8_SET_FIDVID_CORE0_ONLY 1
#endif
-static void print_initcpu8 (const char *strval, unsigned int val)
+static void print_initcpu8(const char *strval, unsigned int val)
{
- printk(BIOS_DEBUG, "%s%02x\n", strval, val);
+ printk(BIOS_DEBUG, "%s%02x\n", strval, val);
}
-static void print_initcpu8_nocr (const char *strval, unsigned val)
+static void print_initcpu8_nocr(const char *strval, unsigned val)
{
- printk(BIOS_DEBUG, "%s%02x", strval, val);
+ printk(BIOS_DEBUG, "%s%02x", strval, val);
}
-static void print_initcpu16 (const char *strval, unsigned val)
+static void print_initcpu16(const char *strval, unsigned val)
{
- printk(BIOS_DEBUG, "%s%04x\n", strval, val);
+ printk(BIOS_DEBUG, "%s%04x\n", strval, val);
}
static inline void print_initcpu(const char *strval, unsigned val)
{
- printk(BIOS_DEBUG, "%s%08x\n", strval, val);
+ printk(BIOS_DEBUG, "%s%08x\n", strval, val);
}
-typedef void (*process_ap_t)(unsigned apicid, void *gp);
+typedef void (*process_ap_t) (unsigned apicid, void *gp);
/* See page 330 of Publication # 26094 Revision: 3.30 Issue Date:
February 2006
* for APIC id discussion
*/
@@ -80,7 +80,8 @@
* @param process pointer to the function to run
* @param gp general purpose argument to be passed as a parameter to the
function
*/
-static void for_each_ap(unsigned bsp_apicid, unsigned core_range, process_ap_t
process_ap, void *gp)
+static void for_each_ap(unsigned bsp_apicid, unsigned core_range,
+ process_ap_t process_ap, void *gp)
{
/* Assume the OS will not change our APIC ID. Why does this matter?
Because some of the setup
* we do for other cores may depend on it not being changed.
@@ -88,68 +89,73 @@
unsigned int ap_apicid;
unsigned int nodes;
- unsigned int siblings = 0;
- unsigned int disable_siblings = 1;
- unsigned int e0_later_single_core;
- unsigned int nb_cfg_54;
- int i,j;
+ unsigned int siblings = 0;
+ unsigned int disable_siblings = 1;
+ unsigned int e0_later_single_core;
+ unsigned int nb_cfg_54;
+ int i, j;
/* The get_nodes function is defined in
northbridge/amd/k8/coherent_ht.c */
nodes = get_nodes();
/* if the get_option fails siblings remain disabled. */
- disable_siblings = !CONFIG_LOGICAL_CPUS;
+ disable_siblings = !CONFIG_LOGICAL_CPUS;
get_option(&disable_siblings, "dual_core");
-
+
/* There is an interesting problem in different steppings. See page
373. The interpretation of the
* APIC ID bits is different. To determine which order is used, check
bit 54 of the
- /* here we assume that all nodes are the same stepping. If not,
"otherwise we can use use nb_cfg_54 from bsp for all nodes" */
- nb_cfg_54 = read_nb_cfg_54();
+ /* here we assume that all nodes are the same stepping. If not,
"otherwise we can use use nb_cfg_54 from bsp for all nodes" */
+ nb_cfg_54 = read_nb_cfg_54();
- for(i=0; i<nodes;i++) {
+ for (i = 0; i < nodes; i++) {
e0_later_single_core = 0;
/* Page 166. This field indicates the number of cores, with 0
meaning 1, 1 meaning 2, and all else reserved */
- j = ((pci_conf1_read_config32(PCI_BDF(0, 0x18+i, 3),
NORTHBRIDGE_CAP) >> NBCAP_CmpCap_SHIFT) & NBCAP_CmpCap_MASK);
- if(nb_cfg_54) {
- if(j == 0 ) // if it is single core, we need to increase
siblings for apic calculation
- J = 1;
- }
- siblings = j;
+ j = ((pci_conf1_read_config32
+ (PCI_BDF(0, 0x18 + i, 3),
+ NORTHBRIDGE_CAP) >> NBCAP_CmpCap_SHIFT) &
+ NBCAP_CmpCap_MASK);
+ if (nb_cfg_54) {
+ if (j == 0) // if it is single core, we need to
increase siblings for apic calculation
+ J = 1;
+ }
+ siblings = j;
- unsigned jstart, jend;
+ unsigned jstart, jend;
- if(core_range == 2) {
- jstart = 1;
- }
- else {
+ if (core_range == 2) {
+ jstart = 1;
+ } else {
jstart = 0;
}
- if (disable_siblings || (core_range==1)) {
- jend = 0;
- } else {
- jend = siblings;
- }
-
-
- for(j=jstart; j<=jend; j++) {
+ if (disable_siblings || (core_range == 1)) {
+ jend = 0;
+ } else {
+ jend = siblings;
+ }
- ap_apicid = i * (nb_cfg_54?(siblings+1):1) + j *
(nb_cfg_54?1:8);
- #if (ENABLE_APIC_EXT_ID == 1)
- #if LIFT_BSP_APIC_ID == 0
- if( (i!=0) || (j!=0)) /* except bsp */
- #endif
- ap_apicid += APIC_ID_OFFSET;
- #endif
+ for (j = jstart; j <= jend; j++) {
- if(ap_apicid == bsp_apicid) continue;
+ ap_apicid =
+ i * (nb_cfg_54 ? (siblings + 1) : 1) +
+ j * (nb_cfg_54 ? 1 : 8);
- process_ap(ap_apicid, gp);
+#if (ENABLE_APIC_EXT_ID == 1)
+#if LIFT_BSP_APIC_ID == 0
+ if ((i != 0) || (j != 0)) /* except bsp */
+#endif
+ ap_apicid += APIC_ID_OFFSET;
+#endif
- }
- }
+ if (ap_apicid == bsp_apicid)
+ continue;
+
+ process_ap(ap_apicid, gp);
+
+ }
+ }
}
/**
@@ -169,43 +175,43 @@
*/
static int lapic_remote_read(int apicid, int reg, unsigned int *pvalue)
{
- int timeout;
- unsigned status;
- int result;
+ int timeout;
+ unsigned status;
+ int result;
/* Wait for the idle state. Could we enter this with the APIC busy?
It's possible. */
- lapic_wait_icr_idle();
+ lapic_wait_icr_idle();
/* The APIC Interrupt Control Registers define the operations and
destinations.
* In this case, we set ICR2 to the dest, set the op to REMOTE READ,
and set the
* reg (which is 16-bit aligned, it seems, hence the >> 4
*/
- lapic_write(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid));
- lapic_write(LAPIC_ICR, LAPIC_DM_REMRD | (reg >> 4));
+ lapic_write(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid));
+ lapic_write(LAPIC_ICR, LAPIC_DM_REMRD | (reg >> 4));
/* it's started. now we wait. */
- timeout = 0;
+ timeout = 0;
- do {
+ do {
/* note here the ICR is command and status. */
/* Why don't we use the lapic_wait_icr_idle() above? */
/* That said, it's a bad idea to mess with this code too much.
* APICs (and their code) are quite fragile.
*/
- status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY;
- } while (status == LAPIC_ICR_BUSY && timeout++ < 1000);
+ status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY;
+ } while (status == LAPIC_ICR_BUSY && timeout++ < 1000);
/* interesting but the timeout is not checked, hence no error on the
send! */
- timeout = 0;
- do {
- status = lapic_read(LAPIC_ICR) & LAPIC_ICR_RR_MASK;
- } while (status == LAPIC_ICR_RR_INPROG && timeout++ < 1000);
+ timeout = 0;
+ do {
+ status = lapic_read(LAPIC_ICR) & LAPIC_ICR_RR_MASK;
+ } while (status == LAPIC_ICR_RR_INPROG && timeout++ < 1000);
- result = -1;
- if (status == LAPIC_ICR_RR_VALID) {
- *pvalue = lapic_read(LAPIC_RRR);
- result = 0;
- }
- return result;
+ result = -1;
+ if (status == LAPIC_ICR_RR_VALID) {
+ *pvalue = lapic_read(LAPIC_RRR);
+ result = 0;
+ }
+ return result;
}
#define LAPIC_MSG_REG 0x380
@@ -215,16 +221,22 @@
static void init_fidvid_ap(unsigned bsp_apicid, unsigned apicid);
#endif
-static inline __attribute__((always_inline)) void
print_apicid_nodeid_coreid(unsigned apicid, struct node_core_id id, const char
*str)
+static inline __attribute__ ((always_inline))
+void print_apicid_nodeid_coreid(unsigned apicid, struct node_core_id id,
+ const char *str)
{
- #if CONFIG_USE_PRINTK_IN_CAR
- printk_debug("%s --- { APICID = %02x NODEID = %02x COREID =
%02x} ---\r\n", str, apicid, id.nodeid, id.coreid);
- #else
- printk(BIOS_DEBUG, str);
- printk(BIOS_DEBUG, " ---- {APICID = ");
print_debug_hex8(apicid);
- printk(BIOS_DEBUG, " NODEID = "), print_debug_hex8(id.nodeid);
printk(BIOS_DEBUG, " COREID = "), print_debug_hex8(id.coreid);
- printk(BIOS_DEBUG, "} --- \r\n");
- #endif
+#if CONFIG_USE_PRINTK_IN_CAR
+ printk_debug
+ ("%s --- { APICID = %02x NODEID = %02x COREID = %02x} ---\r\n",
+ str, apicid, id.nodeid, id.coreid);
+#else
+ printk(BIOS_DEBUG, str);
+ printk(BIOS_DEBUG, " ---- {APICID = ");
+ print_debug_hex8(apicid);
+ printk(BIOS_DEBUG, " NODEID = "), print_debug_hex8(id.nodeid);
+ printk(BIOS_DEBUG, " COREID = "), print_debug_hex8(id.coreid);
+ printk(BIOS_DEBUG, "} --- \r\n");
+#endif
}
@@ -237,18 +249,20 @@
*/
static unsigned int wait_cpu_state(unsigned apicid, unsigned state)
{
- unsigned readback = 0;
+ unsigned readback = 0;
unsigned timeout = 1;
int loop = 2000000;
- while(--loop>0) {
- if(lapic_remote_read(apicid, LAPIC_MSG_REG, &readback)!=0)
continue;
- if((readback & 0xff) == state) {
+ while (--loop > 0) {
+ if (lapic_remote_read(apicid, LAPIC_MSG_REG, &readback) !=
+ 0)
+ continue;
+ if ((readback & 0xff) == state) {
timeout = 0;
- break; //target cpu is in stage started
+ break; //target cpu is in stage started
}
- }
- if(timeout) {
- if(readback) {
+ }
+ if (timeout) {
+ if (readback) {
timeout = readback;
}
}
@@ -261,17 +275,16 @@
* @param ap_apicid the apic id of the CPu
* @param gp arbitrary parameter
*/
-static void wait_ap_started(unsigned ap_apicid, void *gp )
+static void wait_ap_started(unsigned ap_apicid, void *gp)
{
unsigned timeout;
- timeout = wait_cpu_state(ap_apicid, 0x33); // started
- if(timeout) {
- print_initcpu8_nocr("*", ap_apicid);
- print_initcpu("*", timeout);
+ timeout = wait_cpu_state(ap_apicid, 0x33); // started
+ if (timeout) {
+ print_initcpu8_nocr("*", ap_apicid);
+ print_initcpu("*", timeout);
+ } else {
+ print_initcpu8_nocr(" ", ap_apicid);
}
- else {
- print_initcpu8_nocr(" ", ap_apicid);
- }
}
/**
@@ -280,18 +293,18 @@
*/
static void wait_all_aps_started(unsigned bsp_apicid)
{
- for_each_ap(bsp_apicid, 0 , wait_ap_started, (void *)0);
+ for_each_ap(bsp_apicid, 0, wait_ap_started, (void *) 0);
}
/**
* Wait on all other cores to start. This includes cores on bsp, we think.
* @param bsp_apicid The BSP APIC ID
*/
-static void wait_all_other_cores_started(unsigned bsp_apicid) // all aps other
than core0
+static void wait_all_other_cores_started(unsigned bsp_apicid) // all aps
other than core0
{
- printk(BIOS_DEBUG, "started ap apicid: ");
- for_each_ap(bsp_apicid, 2 , wait_ap_started, (void *)0);
- printk(BIOS_DEBUG, "\r\n");
+ printk(BIOS_DEBUG, "started ap apicid: ");
+ for_each_ap(bsp_apicid, 2, wait_ap_started, (void *) 0);
+ printk(BIOS_DEBUG, "\r\n");
}
/**
@@ -300,13 +313,13 @@
*/
static void allow_all_aps_stop(unsigned bsp_apicid)
{
- lapic_write(LAPIC_MSG_REG, (bsp_apicid<<24) | 0x44); // allow aps to
stop
+ lapic_write(LAPIC_MSG_REG, (bsp_apicid << 24) | 0x44); // allow aps to
stop
}
static void STOP_CAR_AND_CPU(void)
{
- disable_cache_as_ram(); // inline
- stop_this_cpu(); // inline, it will stop all cores except node0/core0
the bsp ....
+ disable_cache_as_ram(); // inline
+ stop_this_cpu(); // inline, it will stop all cores except
node0/core0 the bsp ....
}
#ifndef MEM_TRAIN_SEQ
@@ -315,137 +328,188 @@
#if MEM_TRAIN_SEQ == 1
-static inline void train_ram_on_node(unsigned nodeid, unsigned coreid, struct
sys_info *sysinfo, unsigned retcall);
+static inline void train_ram_on_node(unsigned nodeid, unsigned coreid,
+ struct sys_info *sysinfo,
+ unsigned retcall);
#endif
-unsigned int init_cpus(unsigned cpu_init_detectedx ,struct sys_info *sysinfo)
+/**
+ * Init all the CPUs. Part of the process involves setting APIC IDs for all
cores on all sockets. The code that is run
+ * is for the most part the same on all cpus and cores of cpus.
+ * Since we only support F2 and later Opteron CPUs our job is considerably
simplified
+ * as compared to v2. The basic process it to set up the cpu 0 core 0, then
the other cpus, one by one.
+ * Complications: BSP, a.k.a. cpu 0, comes up with APIC id 0, the others all
come up with APIC id 7, including other cpu 0 cores.
+ * There is also the question of the need to "lift" the BSP APIC id. For some
setups, we want the BSP APIC id to be 0; for others,
+ * a non-zero value is preferred. This means that we have to change the BSP
APIC ID on the fly.
+ * So here we have it, some of the slickest code you'll ever read. Which cores
run this function?
+ * All of them.
+ * Do they communicate through APIC Interrupts or memory? Yes. Both. APICs
before
+ * memory is ready, memory afterword. What is the state of the cores at the
end of this function?
+ * They are all ready to go, just waiting to be started up. What is the state
of memory on all sockets?
+ * It's all working.
+ * @param cpu_init_detectedx has this cpu been init'ed before?
+ * @param sysinfo The sys_info pointer
+ * @returns the BSP APIC ID
+ */
+unsigned int init_cpus(unsigned cpu_init_detectedx,
+ struct sys_info *sysinfo)
{
- unsigned bsp_apicid = 0;
- unsigned apicid;
- struct node_core_id id;
+ unsigned bsp_apicid = 0;
+ unsigned apicid;
+ struct node_core_id id;
- /*
- * MTRR must be set by this point.
- */
+ /*
+ * MTRR must be set by this point.
+ */
- /* that is from initial apicid, we need nodeid and coreid later
*/
- id = get_node_core_id_x();
+ /* that is from initial apicid, we need nodeid and coreid later */
+ id = get_node_core_id_x();
+ printk(BIOS_DEBUG, "init_cpus: node %d core %d\n", id.nodeid,
id.coreid);
+ /* The NB_CFG MSR is shared between cores on a given node.
+ * Here is an interesting parallel processing bug: if you were to start
the
+ * other cores and THEN make this setting, different cores might read
+ * a different value! Since ALL cores run this code, it is very
important to have
+ * core0 initialize this setting before any others.
+ * So do this setting very early in the function to make sure the bit
has a
+ * consistent value on all cores.
+ */
+ if (id.coreid == 0) {
+ set_apicid_cpuid_lo(); /* only set it on core0 */
+ /* Should we enable extended APIC IDs? This feature is used on
a number of mainboards.
+ * It is required when the board requires more than 4 bits of
ID.
+ * the question is, why not use it on all of them? Would it do
harm to always enable it?
+ */
+#if ENABLE_APIC_EXT_ID == 1
+ enable_apic_ext_id(id.nodeid);
+#endif
+ }
- /* NB_CFG MSR is shared between cores, so we need make sure
core0 is done at first --- use wait_all_core0_started */
- if(id.coreid == 0) {
- set_apicid_cpuid_lo(); /* only set it on core0 */
- #if ENABLE_APIC_EXT_ID == 1
- enable_apic_ext_id(id.nodeid);
- #endif
- }
-
- enable_lapic();
+ enable_lapic();
// init_timer(); // We need TMICT to pass msg for FID/VID change
- #if (ENABLE_APIC_EXT_ID == 1)
- unsigned initial_apicid = get_initial_apicid();
- #if LIFT_BSP_APIC_ID == 0
- if( initial_apicid != 0 ) // other than bsp
- #endif
- {
- /* use initial apic id to lift it */
- u32 dword = lapic_read(LAPIC_ID);
- dword &= ~(0xff<<24);
- dword |= (((initial_apicid + APIC_ID_OFFSET) &
0xff)<<24);
+#if (ENABLE_APIC_EXT_ID == 1)
+ unsigned initial_apicid = get_initial_apicid();
+ /* We don't always need to lift the BSP APIC ID.
+ * Again, is there harm if we do it anyway?
+ */
+#if LIFT_BSP_APIC_ID == 0
+ if (initial_apicid != 0) // This CPU is not the BSP so lift it.
+#endif
+ {
+ /* Use the CPUs initial 4-bit APIC id as the basis for the
extended ID */
+ u32 dword = lapic_read(LAPIC_ID);
+ dword &= ~(0xff << 24);
+ dword |=
+ (((initial_apicid + APIC_ID_OFFSET) & 0xff) << 24);
- lapic_write(LAPIC_ID, dword);
- }
+ lapic_write(LAPIC_ID, dword);
+ }
+#if LIFT_BSP_APIC_ID == 1
+ bsp_apicid += APIC_ID_OFFSET;
+#endif
- #if LIFT_BSP_APIC_ID == 1
- bsp_apicid += APIC_ID_OFFSET;
- #endif
+#endif
- #endif
+ apicid = lapicid();
- /* get the apicid, it may be lifted already */
- apicid = lapicid();
+#if 1
+ // show our apicid, nodeid, and coreid
+ if (id.coreid == 0) {
+ if (id.nodeid != 0) //all core0 except bsp
+ print_apicid_nodeid_coreid(apicid, id, " core0: ");
+ }
+#if 1
+ else { //all core non-zero
+ print_apicid_nodeid_coreid(apicid, id, " core1: ");
+ }
+#endif
-#if 0
- // show our apicid, nodeid, and coreid
- if( id.coreid==0 ) {
- if (id.nodeid!=0) //all core0 except bsp
- print_apicid_nodeid_coreid(apicid, id, " core0:
");
- }
- #if 0
- else { //all core1
- print_apicid_nodeid_coreid(apicid, id, " core1: ");
- }
- #endif
-
#endif
- if (cpu_init_detectedx) {
- print_apicid_nodeid_coreid(apicid, id,
"\r\n\r\n\r\nINIT detected from ");
- printk(BIOS_DEBUG, "\r\nIssuing SOFT_RESET...\r\n");
- soft_reset();
- }
+ if (cpu_init_detectedx) {
+ print_apicid_nodeid_coreid(apicid, id,
+ "\r\n\r\n\r\nINIT detected from ");
+ printk(BIOS_DEBUG, "\r\nIssuing SOFT_RESET...\r\n");
+ soft_reset();
+ }
- if(id.coreid==0) {
- distinguish_cpu_resets(id.nodeid);
- // start_other_core(id.nodeid); // start second core in
first cpu, only allowed for nb_cfg_54 is not set
- }
+ if (id.coreid == 0) {
+ /* not known what this is yet. */
+ distinguish_cpu_resets(id.nodeid);
+ // start_other_core(id.nodeid); // start second
core in first cpu, only allowed for nb_cfg_54 is not set
+ }
+ //Indicate to other CPUs that our CPU is running.
+ lapic_write(LAPIC_MSG_REG, (apicid << 24) | 0x33);
- //here don't need to wait
- lapic_write(LAPIC_MSG_REG, (apicid<<24) | 0x33); // mark the
cpu is started
+ /* non-BSP CPUs are now set up and need to halt. BSP will train memory
on all CPUs. */
+ if (apicid != bsp_apicid) {
+ unsigned timeout = 1;
+ unsigned loop = 100;
+#if K8_SET_FIDVID == 1
+#if (CONFIG_LOGICAL_CPUS == 1) && (K8_SET_FIDVID_CORE0_ONLY == 1)
+ if (id.coreid == 0) // only need set fid for core0
+#endif
+ init_fidvid_ap(bsp_apicid, apicid);
+#endif
- if(apicid != bsp_apicid) {
- unsigned timeout=1;
- unsigned loop = 100;
- #if K8_SET_FIDVID == 1
- #if (CONFIG_LOGICAL_CPUS == 1) && (K8_SET_FIDVID_CORE0_ONLY ==
1)
- if(id.coreid == 0 ) // only need set fid for core0
- #endif
- init_fidvid_ap(bsp_apicid, apicid);
- #endif
+ // We need to stop the CACHE as RAM for this CPU, really?
+ while (timeout && (loop-- > 0)) {
+ timeout = wait_cpu_state(bsp_apicid, 0x44);
+ }
+ if (timeout) {
+ print_initcpu8
+ ("while waiting for BSP signal to STOP, timeout in
ap ",
+ apicid);
+ }
+ lapic_write(LAPIC_MSG_REG, (apicid << 24) | 0x44); // bsp
can not check it before stop_this_cpu
+ set_init_ram_access();
+#if MEM_TRAIN_SEQ == 1
+ train_ram_on_node(id.nodeid, id.coreid, sysinfo,
+ STOP_CAR_AND_CPU);
+#endif
- // We need to stop the CACHE as RAM for this CPU,
really?
- while(timeout && (loop-->0)) {
- timeout = wait_cpu_state(bsp_apicid, 0x44);
- }
- if(timeout) {
- print_initcpu8("while waiting for BSP signal to
STOP, timeout in ap ", apicid);
- }
- lapic_write(LAPIC_MSG_REG, (apicid<<24) | 0x44); //
bsp can not check it before stop_this_cpu
- set_init_ram_access();
- #if MEM_TRAIN_SEQ == 1
- train_ram_on_node(id.nodeid, id.coreid, sysinfo,
STOP_CAR_AND_CPU);
- #endif
+ STOP_CAR_AND_CPU();
+ }
- STOP_CAR_AND_CPU();
- }
-
- return bsp_apicid;
+ return bsp_apicid;
}
-static unsigned is_core0_started(unsigned nodeid)
+/**
+ * Given a node, find out if core0 is started.
+ * @param nodeid the node ID
+ * @returns non-zero if node is started
+ */
+static unsigned int is_core0_started(unsigned nodeid)
{
- u32 htic;
- struct device * device;
- device = PCI_DEV(0, 0x18 + nodeid, 0);
- htic = pci_conf1_read_config32(device, HT_INIT_CONTROL);
- htic &= HTIC_INIT_Detect;
- return htic;
+ u32 htic;
+ u32 device;
+ device = PCI_BDF(0, 0x18 + nodeid, 0);
+ htic = pci_conf1_read_config32(device, HT_INIT_CONTROL);
+ htic &= HTIC_INIT_Detect;
+ return htic;
}
+/**
+ * Wait for all core 0s on all CPUs to start up.
+ */
static void wait_all_core0_started(void)
{
//When core0 is started, it will distingush_cpu_resets. So wait for that
+ // whatever that means
unsigned i;
unsigned nodes = get_nodes();
- printk(BIOS_DEBUG, "core0 started: ");
- for(i=1;i<nodes;i++) { // skip bsp, because it is running on bsp
- while(!is_core0_started(i)) {}
- print_initcpu8_nocr(" ", i);
- }
- printk(BIOS_DEBUG, "\r\n");
+ printk(BIOS_DEBUG, "core0 started: ");
+ /* The BSP is node 0 by definition. If we're here, we are running.
+ * Start the loop at 1
+ */
+ for (i = 1; i < nodes; i++) {
+ while (!is_core0_started(i)) {
+ }
+ print_initcpu8_nocr(" ", i);
+ }
+ printk(BIOS_DEBUG, "\r\n");
}
-
Modified: coreboot-v3/mainboard/amd/serengeti/mainboard.h
===================================================================
--- coreboot-v3/mainboard/amd/serengeti/mainboard.h 2008-08-28 02:32:27 UTC
(rev 835)
+++ coreboot-v3/mainboard/amd/serengeti/mainboard.h 2008-08-28 02:35:56 UTC
(rev 836)
@@ -31,3 +31,5 @@
#define HT_CHAIN_END_UNITID_BASE 0x6
#define SB_HT_CHAIN_ON_BUS0 2
#define SB_HT_CHAIN_UNITID_OFFSET_ONLY 1
+#define ENABLE_APIC_EXT_ID 0
+#define LIFT_BSP_APIC_ID 1
--
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
