Author: hailfinger
Date: 2008-08-29 11:06:13 +0200 (Fri, 29 Aug 2008)
New Revision: 845

Modified:
   coreboot-v3/device/pci_device.c
Log:
Improve pci scan debugging. This helped me find a rather nasty bug.
Message level is BIOS_SPEW for everything except error conditions.

Signed-off-by: Carl-Daniel Hailfinger <[EMAIL PROTECTED]>
Acked-by: Stefan Reinauer <[EMAIL PROTECTED]>
Acked-by: Ronald G. Minnich <[EMAIL PROTECTED]>


Modified: coreboot-v3/device/pci_device.c
===================================================================
--- coreboot-v3/device/pci_device.c     2008-08-29 08:49:24 UTC (rev 844)
+++ coreboot-v3/device/pci_device.c     2008-08-29 09:06:13 UTC (rev 845)
@@ -636,6 +636,9 @@
                        vendor = mainboard_pci_subsystem_vendor;
                if (!device)
                        device = mainboard_pci_subsystem_device;
+       } else {
+               printk(BIOS_DEBUG, "%s: Device not on_mainboard\n",
+                      dev_path(dev));
        }
 #endif
        /* Set the subsystem vendor and device ID for mainboard devices. */
@@ -1098,6 +1101,10 @@
 
        printk(BIOS_DEBUG, "%s start bus %p, bus->dev %p\n", __func__, bus,
               bus->dev);
+       if (bus->dev->path.type != DEVICE_PATH_PCI_BUS)
+               printk(BIOS_ERR, "ERROR: pci_scan_bus called with incorrect "
+                      "bus->dev->path.type, path is %s\n", dev_path(bus->dev));
+
 #if PCI_BUS_SEGN_BITS
        printk(BIOS_DEBUG, "PCI: pci_scan_bus for bus %04x:%02x\n",
               bus->secondary >> 8, bus->secondary & 0xff);
@@ -1139,6 +1146,8 @@
                if ((PCI_FUNC(devfn) == 0x00) &&
                    (!dev
                     || (dev->enabled && ((dev->hdr_type & 0x80) != 0x80)))) {
+                       printk(BIOS_SPEW, "Not a multi function device, or the "
+                              "device is not present. Skip to next device.\n");
                        devfn += 0x07;
                }
        }
@@ -1186,6 +1195,7 @@
  */
 unsigned int pci_domain_scan_bus(struct device *dev, unsigned int max)
 {
+       printk(BIOS_SPEW, "pci_domain_scan_bus: calling pci_scan_bus\n");
        /* There is only one link on this device, and it is always link 0. */
        return pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max);
 }
@@ -1277,6 +1287,7 @@
  */
 unsigned int pci_scan_bridge(struct device *dev, unsigned int max)
 {
+       printk(BIOS_SPEW, "pci_scan_bridge: calling pci_scan_bus\n");
        return do_pci_scan_bridge(dev, max, pci_scan_bus);
 }
 


--
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to