Daniel Lindenaar wrote: > hmmm it's working partly, it seems. First i did something wrong that > skrewed up the com port setup, which I fixed. I now get the debug > messages I added via the serial line, but, strangely, only when i do a > (warm) reboot from a running linux, not with a cold boot... This sounds an awful lot like superio init, or some GPIO issue.
Are you initializing your superio correctly? Does your board use the
82c686 superio? Or does it have an extra superio?
(Check with superiotool)
> probably something needs to be set that doesn't get set by default on
> cold reboot.
>
> Anyway, it's the SMBus controller where things go wrong; the log says:
>
> SMBUS controller not found
What device are you looking for at that point?
On the vt82c686 the smbus device has vendor 0x1106 and device 0x3057
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: [EMAIL PROTECTED] • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866
signature.asc
Description: OpenPGP digital signature
-- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
