Could someone explain the differences in linux kernel boot
logs for coreboot vs BIOS that are attached. The coreboot
log is here too, just in case.
The total absence of reserved memory ranges seems
unnatural. The DMA zone range starting at 0x00000001
looks fishy too.
I'm completely lost, the hang happen at init/main.c in
console_init()
--
Vincent Legoll
Linux version 2.6.27-rc5-00100-gec0c15a ([EMAIL PROTECTED]) (gcc version 4.3.1
(Gentoo 4.3.1-r1 p1.1) ) #19 SMP Wed Sep 3 21:11:57 CEST 2008
Command line: apic=debug debug kgdbwait irqpoll loglevel=8
earlycon=uart8250,io,0x3f8,115200n8 earlyprintk=serial,ttyS0,115200 acpi=off
root=/dev/sda3 console=tty0 console=ttyS0,115200
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000c0000 - 00000000000f0000 (usable)
BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
Early serial console at I/O port 0x3f8 (options '115200n8')
console [uart0] enabled
last_pfn = 0x80000 max_arch_pfn = 0x3ffffffff
init_memory_mapping
0000000000 - 0080000000 page 2M
kernel direct mapping tables up to 80000000 @ 8000-b000
last_map_addr: 80000000 end: 80000000
DMI not present or invalid.
(5 early reservations) ==> bootmem [0000000000 - 0080000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000740c18] TEXT DATA BSS ==> [0000200000 - 0000740c18]
#3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#4 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
Scan SMP from ffff880000000000 for 1024 bytes.
found SMP MP-table at [ffff880000000010] 00000010
[ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff]
on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x000000a0
0: 0x000000c0 -> 0x000000f0
0: 0x00000100 -> 0x00080000
On node 0 totalpages: 524239
DMA zone: 2544 pages, LIFO batch:0
DMA32 zone: 513080 pages, LIFO batch:31
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: SHUTTLE
MPTABLE: Product ID: SN25P
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #1
Bus #0 is PCI
Bus #1 is PCI
Bus #2 is PCI
Bus #3 is PCI
Bus #4 is PCI
Bus #5 is PCI
Bus #6 is ISA
I/O APIC #2 Version 17 at 0xF4300000.
Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00
Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01
Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02
Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04
Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06
Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07
Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08
Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09
Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d
Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f
Int: type 0, pol 3, trig 3, bus 00, IRQ 04, APIC ID 2, APIC INT 0a
Int: type 0, pol 3, trig 3, bus 00, IRQ 08, APIC ID 2, APIC INT 0b
Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 0a
Int: type 0, pol 3, trig 3, bus 00, IRQ 1c, APIC ID 2, APIC INT 0b
Int: type 0, pol 3, trig 3, bus 00, IRQ 20, APIC ID 2, APIC INT 0c
Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 03
Int: type 0, pol 3, trig 3, bus 05, IRQ 18, APIC ID 2, APIC INT 05
Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0c
Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05
Int: type 0, pol 3, trig 3, bus 02, IRQ 00, APIC ID 2, APIC INT 0c
Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
Setting APIC routing to flat
Processors: 2
mapped APIC to ffffffffff5fc000 ( fee00000)
mapped IOAPIC to ffffffffff5fb000 (00000000f4300000)
Allocating PCI resources starting at 88000000 (gap: 80000000:80000000)
PERCPU: Allocating 33056 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 8, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515624
Kernel command line: apic=debug debug kgdbwait irqpoll loglevel=8
earlycon=uart8250,io,0x3f8,115200n8 earlyprintk=serial,ttyS0,115200 acpi=off
root=/dev/sda3 console=tty0 console=ttyS0,115200 init=/bin/bash
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC: Using PIT calibration value
Detected 1809.235 MHz processor.
spurious 8259A interrupt: IRQ7.
Linux version 2.6.27-rc5-00100-gec0c15a ([EMAIL PROTECTED]) (gcc version 4.3.1
(Gentoo 4.3.1-r1 p1.1) ) #19 SMP Wed Sep 3 21:11:57 CEST 2008
Command line: apic=debug debug kgdbwait irqpoll loglevel=8
earlycon=uart8250,io,0x3f8,115200n8 earlyprintk=serial,ttyS0,115200 acpi=off
root=/dev/sda3 console=tty0 console=ttyS0,115200
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Early serial console at I/O port 0x3f8 (options '115200n8')
console [uart0] enabled
last_pfn = 0x7fff0 max_arch_pfn = 0x3ffffffff
init_memory_mapping
0000000000 - 007fe00000 page 2M
007fe00000 - 007fff0000 page 4k
kernel direct mapping tables up to 7fff0000 @ 8000-c000
last_map_addr: 7fff0000 end: 7fff0000
DMI 2.2 present.
(5 early reservations) ==> bootmem [0000000000 - 007fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000740c18] TEXT DATA BSS ==> [0000200000 - 0000740c18]
#3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
Scan SMP from ffff880000000000 for 1024 bytes.
Scan SMP from ffff88000009fc00 for 1024 bytes.
Scan SMP from ffff8800000f0000 for 65536 bytes.
found SMP MP-table at [ffff8800000f3930] 000f3930
[ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff]
on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007fff0
On node 0 totalpages: 524175
DMA zone: 2495 pages, LIFO batch:0
DMA32 zone: 513064 pages, LIFO batch:31
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: OEM00000
MPTABLE: Product ID: PROD00000000
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #1
Bus #0 is PCI
Bus #1 is PCI
Bus #2 is PCI
Bus #3 is PCI
Bus #4 is PCI
Bus #5 is PCI
Bus #6 is ISA
I/O APIC #2 Version 17 at 0xFEC00000.
Int: type 0, pol 3, trig 3, bus 00, IRQ 04, APIC ID 2, APIC INT 0c
Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 0a
Int: type 0, pol 3, trig 3, bus 00, IRQ 08, APIC ID 2, APIC INT 0b
Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0c
Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 03
Int: type 0, pol 3, trig 3, bus 05, IRQ 18, APIC ID 2, APIC INT 05
Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05
Int: type 0, pol 3, trig 3, bus 02, IRQ 00, APIC ID 2, APIC INT 0c
Int: type 0, pol 3, trig 3, bus 00, IRQ 1c, APIC ID 2, APIC INT 0b
Int: type 0, pol 3, trig 3, bus 00, IRQ 20, APIC ID 2, APIC INT 0a
Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00
Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01
Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02
Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04
Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06
Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07
Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08
Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09
Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d
Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f
Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
Setting APIC routing to flat
Processors: 2
mapped APIC to ffffffffff5fc000 ( fee00000)
mapped IOAPIC to ffffffffff5fb000 (00000000fec00000)
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
PERCPU: Allocating 33056 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 8, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515559
Kernel command line: apic=debug debug kgdbwait irqpoll loglevel=8
earlycon=uart8250,io,0x3f8,115200n8 earlyprintk=serial,ttyS0,115200 acpi=off
root=/dev/sda3 console=tty0 console=ttyS0,115200
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC: Using PIT calibration value
Detected 1809.243 MHz processor.
spurious 8259A interrupt: IRQ7.
Restarting system.
INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} ---
Issuing SOFT_RESET...
coreboot-2.0.0_Fallback Sun Aug 31 19:50:12 CEST 2008 starting...
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
ht reset -
coreboot-2.0.0_Fallback Sun Aug 31 19:50:12 CEST 2008 starting...
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
SMBus controller enabled
Ram1.00
Ram2.00
Ram3
Initializing memory: done
Ram4
v_esp=000ced90
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region: Done
Uncompressing coreboot to RAM.
src=fffdf000
dst=00004000
coreboot_ram.nrv2b length = 0000d670
coreboot_ram.bin length = 00025c34
Jumping to coreboot.
coreboot-2.0.0_Fallback Fri Sep 5 00:27:35 CEST 2008 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:00.0 [10de/005e] enabled
PCI: 00:00.0 [10de/005e] enabled next_unitid: 000f
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [10de/005e] enabled
PCI: 00:01.0 [10de/0050] enabled
PCI: 00:01.1 [10de/0052] enabled
PCI: 00:02.0 [10de/005a] enabled
PCI: 00:02.1 [10de/005b] enabled
PCI: 00:04.0 [10de/0059] disabled
PCI: 00:04.1 [10de/0058] disabled
PCI: 00:06.0 [10de/0053] enabled
PCI: 00:07.0 [10de/0054] enabled
PCI: 00:08.0 [10de/0055] enabled
PCI: 00:09.0 [10de/005c] enabled
PCI: 00:0a.0 [10de/0056] enabled
PCI: 00:0b.0 [10de/005d] enabled
PCI: 00:0c.0 [10de/005d] enabled
PCI: 00:0d.0 [10de/005d] enabled
PCI: 00:0e.0 [10de/005d] enabled
PNP: 002e.0 enabled
PNP: 002e.1 enabled
PNP: 002e.2 disabled
PNP: 002e.3 enabled
PNP: 002e.4 enabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.7 enabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a enabled
PCI: pci_scan_bus for bus 01
PCI: 01:06.0 [1412/1724] enabled
PCI: 01:07.0 [1106/3044] enabled
PCI: pci_scan_bus returning with max=001
PCI: pci_scan_bus for bus 02
PCI: pci_scan_bus returning with max=002
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PCI: pci_scan_bus for bus 04
PCI: 04:00.0 [14e4/1677] enabled
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus for bus 05
PCI: 05:00.0 [1002/554d] enabled
PCI: 05:00.1 [1002/556d] enabled
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus returning with max=005
done
Allocating resources...
Reading resources...
PNP: 002e.0 missing read_resources
PNP: 002e.a missing read_resources
PCI: 00:09.0 24 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus
01 prefmem
PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] size 0x00000000 gran 0x0c bus
02 io
PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] size 0x00000000
gran 0x14 bus 02 prefmem
PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus
02 mem
PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] size 0x00000000 gran 0x0c bus
03 io
PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] size 0x00000000
gran 0x14 bus 03 prefmem
PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus
03 mem
PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] size 0x00000000 gran 0x0c bus
04 io
PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] size 0x00000000
gran 0x14 bus 04 prefmem
Done reading resources.
Allocating VGA resource PCI: 05:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0e.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1d8 <- [0x0000001000 - 0x0000004fff] size 0x00004000 gran 0x0c io
<node 0 link 0>
PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] size 0x10000000 gran 0x14
prefmem <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f43fffff] size 0x00400000 gran 0x14 mem
<node 0 link 0>
PCI: 00:01.0 10 <- [0x0000003c00 - 0x0000003c7f] size 0x00000080 gran 0x07 io
PCI: 00:01.0 14 <- [0x00f4300000 - 0x00f4300fff] size 0x00001000 gran 0x0c mem
PCI: 00:01.0 60 <- [0x0000003000 - 0x00000030ff] size 0x00000100 gran 0x08 io
PCI: 00:01.0 64 <- [0x0000003400 - 0x00000034ff] size 0x00000100 gran 0x08 io
PCI: 00:01.0 68 <- [0x0000003800 - 0x00000038ff] size 0x00000100 gran 0x08 io
PNP: 002e.0 missing set_resources
PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io
PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq
PNP: 002e.3 60 <- [0x0000000378 - 0x000000037f] size 0x00000008 gran 0x03 io
PNP: 002e.3 70 <- [0x0000000007 - 0x0000000007] size 0x00000001 gran 0x00 irq
PNP: 002e.3 74 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 drq
PNP: 002e.4 60 <- [0x0000000290 - 0x0000000297] size 0x00000008 gran 0x03 io
PNP: 002e.4 62 <- [0x0000000000 - 0x0000000007] size 0x00000008 gran 0x03 io
PNP: 002e.4 70 <- [0x0000000000 - 0x0000000000] size 0x00000001 gran 0x00 irq
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000067] size 0x00000008 gran 0x03 io
PNP: 002e.5 62 <- [0x0000000064 - 0x000000006b] size 0x00000008 gran 0x03 io
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] size 0x00000001 gran 0x00 irq
PNP: 002e.5 71 <- [0x0000000002 - 0x0000000001] size 0x00000000 gran 0x00 irq
PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] size 0x00000001 gran 0x00 irq
PNP: 002e.6 71 <- [0x0000000002 - 0x0000000001] size 0x00000000 gran 0x00 irq
PNP: 002e.7 25 <- [0x0000000000 - 0xffffffffffffffff] size 0x00000000 gran 0x00
io
PNP: 002e.7 27 <- [0x0000000000 - 0xffffffffffffffff] size 0x00000000 gran 0x00
io
PNP: 002e.7 b2 <- [0x0000000000 - 0xffffffffffffffff] size 0x00000000 gran 0x00
io
PNP: 002e.7 ba <- [0x0000000000 - 0xffffffffffffffff] size 0x00000000 gran 0x00
io
PNP: 002e.7 c0 <- [0x0000000000 - 0xffffffffffffffff] size 0x00000000 gran 0x00
io
PNP: 002e.7 c2 <- [0x0000000040 - 0x000000003f] size 0x00000000 gran 0x00 io
PNP: 002e.7 c8 <- [0x0000000000 - 0xffffffffffffffff] size 0x00000000 gran 0x00
io
PNP: 002e.7 ca <- [0x0000000000 - 0xffffffffffffffff] size 0x00000000 gran 0x00
io
PNP: 002e.a missing set_resources
PCI: 00:01.1 10 <- [0x0000004000 - 0x000000401f] size 0x00000020 gran 0x05 io
PCI: 00:01.1 20 <- [0x0000003c80 - 0x0000003cbf] size 0x00000040 gran 0x06 io
PCI: 00:01.1 24 <- [0x0000003cc0 - 0x0000003cff] size 0x00000040 gran 0x06 io
PCI: 00:02.0 10 <- [0x00f4301000 - 0x00f4301fff] size 0x00001000 gran 0x0c mem
PCI: 00:02.1 10 <- [0x00f4305000 - 0x00f43050ff] size 0x00000100 gran 0x08 mem
PCI: 00:06.0 20 <- [0x0000004020 - 0x000000402f] size 0x00000010 gran 0x04 io
PCI: 00:07.0 10 <- [0x0000004050 - 0x0000004057] size 0x00000008 gran 0x03 io
PCI: 00:07.0 14 <- [0x00000040a0 - 0x00000040a3] size 0x00000004 gran 0x02 io
PCI: 00:07.0 18 <- [0x0000004060 - 0x0000004067] size 0x00000008 gran 0x03 io
PCI: 00:07.0 1c <- [0x00000040b0 - 0x00000040b3] size 0x00000004 gran 0x02 io
PCI: 00:07.0 20 <- [0x0000004030 - 0x000000403f] size 0x00000010 gran 0x04 io
PCI: 00:07.0 24 <- [0x00f4302000 - 0x00f4302fff] size 0x00001000 gran 0x0c mem
PCI: 00:08.0 10 <- [0x0000004070 - 0x0000004077] size 0x00000008 gran 0x03 io
PCI: 00:08.0 14 <- [0x00000040c0 - 0x00000040c3] size 0x00000004 gran 0x02 io
PCI: 00:08.0 18 <- [0x0000004080 - 0x0000004087] size 0x00000008 gran 0x03 io
PCI: 00:08.0 1c <- [0x00000040d0 - 0x00000040d3] size 0x00000004 gran 0x02 io
PCI: 00:08.0 20 <- [0x0000004040 - 0x000000404f] size 0x00000010 gran 0x04 io
PCI: 00:08.0 24 <- [0x00f4303000 - 0x00f4303fff] size 0x00001000 gran 0x0c mem
PCI: 00:09.0 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c bus
01 io
PCI: 00:09.0 20 <- [0x00f4000000 - 0x00f40fffff] size 0x00100000 gran 0x14 bus
01 mem
PCI: 01:06.0 10 <- [0x0000001400 - 0x000000141f] size 0x00000020 gran 0x05 io
PCI: 01:06.0 14 <- [0x0000001000 - 0x000000107f] size 0x00000080 gran 0x07 io
PCI: 01:07.0 10 <- [0x00f4000000 - 0x00f40007ff] size 0x00000800 gran 0x0b mem
PCI: 01:07.0 14 <- [0x0000001080 - 0x00000010ff] size 0x00000080 gran 0x07 io
PCI: 00:0a.0 10 <- [0x00f4304000 - 0x00f4304fff] size 0x00001000 gran 0x0c mem
PCI: 00:0a.0 14 <- [0x0000004090 - 0x0000004097] size 0x00000008 gran 0x03 io
PCI: 00:0d.0 20 <- [0x00f4100000 - 0x00f41fffff] size 0x00100000 gran 0x14 bus
04 mem
PCI: 04:00.0 10 <- [0x00f4100000 - 0x00f410ffff] size 0x00010000 gran 0x10 mem64
PCI: 04:00.0 30 <- [0x00f4110000 - 0x00f411ffff] size 0x00010000 gran 0x10 romem
PCI: 00:0e.0 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus
05 io
PCI: 00:0e.0 24 <- [0x00e0000000 - 0x00efffffff] size 0x10000000 gran 0x14 bus
05 prefmem
PCI: 00:0e.0 20 <- [0x00f4200000 - 0x00f42fffff] size 0x00100000 gran 0x14 bus
05 mem
PCI: 05:00.0 10 <- [0x00e0000000 - 0x00efffffff] size 0x10000000 gran 0x1c
prefmem64
PCI: 05:00.0 18 <- [0x00f4220000 - 0x00f422ffff] size 0x00010000 gran 0x10 mem64
PCI: 05:00.0 20 <- [0x0000002000 - 0x00000020ff] size 0x00000100 gran 0x08 io
PCI: 05:00.0 30 <- [0x00f4200000 - 0x00f421ffff] size 0x00020000 gran 0x11 romem
PCI: 05:00.1 10 <- [0x00f4230000 - 0x00f423ffff] size 0x00010000 gran 0x10 mem64
PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] size 0x04000000 gran 0x1a mem
<gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 00
PCI: 00:00.0 subsystem <- 10f1/2891
PCI: 00:00.0 cmd <- 06
PCI: 00:01.0 subsystem <- 10f1/2891
PCI: 00:01.0 cmd <- 0f
PNP: 002e.0 missing enable_resources
ck804 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff
ck804 lpc decode:PNP: 002e.3, base=0x00000378, end=0x0000037f
ck804 lpc decode:PNP: 002e.4, base=0x00000290, end=0x00000297
ck804 lpc decode:PNP: 002e.4, base=0x00000000, end=0x00000007
ck804 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000067
ck804 lpc decode:PNP: 002e.5, base=0x00000064, end=0x0000006b
ck804 lpc decode:PNP: 002e.7, base=0x00000000, end=0xffffffff
ck804 lpc decode:PNP: 002e.7, base=0x00000000, end=0xffffffff
ck804 lpc decode:PNP: 002e.7, base=0x00000000, end=0xffffffff
ck804 lpc decode:PNP: 002e.7, base=0x00000000, end=0xffffffff
ck804 lpc decode:PNP: 002e.7, base=0x00000000, end=0xffffffff
ck804 lpc decode:PNP: 002e.7, base=0x00000040, end=0x0000003f
ck804 lpc decode:PNP: 002e.7, base=0x00000000, end=0xffffffff
ck804 lpc decode:PNP: 002e.7, base=0x00000000, end=0xffffffff
PNP: 002e.a missing enable_resources
PCI: 00:01.1 subsystem <- 10f1/2891
PCI: 00:01.1 cmd <- 01
PCI: 00:02.0 subsystem <- 10f1/2891
PCI: 00:02.0 cmd <- 02
PCI: 00:02.1 subsystem <- 10f1/2891
PCI: 00:02.1 cmd <- 02
PCI: 00:06.0 subsystem <- 10f1/2891
PCI: 00:06.0 cmd <- 01
PCI: 00:07.0 subsystem <- 10f1/2891
PCI: 00:07.0 cmd <- 03
PCI: 00:08.0 subsystem <- 10f1/2891
PCI: 00:08.0 cmd <- 03
PCI: 00:09.0 bridge ctrl <- 0003
PCI: 00:09.0 cmd <- 07
PCI: 01:06.0 cmd <- 01
PCI: 01:07.0 cmd <- 83
PCI: 00:0a.0 subsystem <- 10f1/2891
PCI: 00:0a.0 cmd <- 03
PCI: 00:0b.0 bridge ctrl <- 0003
PCI: 00:0b.0 cmd <- 00
PCI: 00:0c.0 bridge ctrl <- 0003
PCI: 00:0c.0 cmd <- 00
PCI: 00:0d.0 bridge ctrl <- 0003
PCI: 00:0d.0 cmd <- 06
PCI: 04:00.0 cmd <- 02
PCI: 00:0e.0 bridge ctrl <- 000b
PCI: 00:0e.0 cmd <- 07
PCI: 05:00.0 cmd <- 03
PCI: 05:00.1 cmd <- 02
PCI: 00:18.1 subsystem <- 10f1/2891
PCI: 00:18.1 cmd <- 00
PCI: 00:18.2 subsystem <- 10f1/2891
PCI: 00:18.2 cmd <- 00
PCI: 00:18.3 cmd <- 00
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
Initializing CPU #0
CPU: vendor AMD device 20f32
CPU: family 0f, model 23, stepping 02
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
microcode: equivalent rev id = 0x0210, current patch id = 0x00000000
microcode: rev id (4a) does not match this patch.
microcode: Not updated! Fix microcode_updates[]
microcode: rev id (150) does not match this patch.
microcode: Not updated! Fix microcode_updates[]
microcode: patch id to apply = 0x0000004d
microcode: updated to patch id = 0x0000004d success
CPU model Dual Core AMD Opteron(tm) Processor 165
Setting up local apic... apic_id: 0x00 done.
ECC Disabled
CPU #0 Initialized
Initializing CPU #1
Waiting for 1 CPUS to stop
CPU: vendor AMD device 20f32
CPU: family 0f, model 23, stepping 02
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
microcode: equivalent rev id = 0x0210, current patch id = 0x00000000
microcode: rev id (4a) does not match this patch.
microcode: Not updated! Fix microcode_updates[]
microcode: rev id (150) does not match this patch.
microcode: Not updated! Fix microcode_updates[]
microcode: patch id to apply = 0x0000004d
microcode: updated to patch id = 0x0000004d success
CPU model Dual Core AMD Opteron(tm) Processor 165
Setting up local apic... apic_id: 0x01 done.
CPU #1 Initialized
All AP CPUs stopped
PCI: 00:18.0 init
PCI: 00:01.0 init
set power on after power fail
RTC Init
RTC: Checksum invalid zeroing cmos
Invalid CMOS LB checksum
PNP: 002e.1 init
PNP: 002e.3 init
PNP: 002e.4 init
PNP: 002e.5 init
Keyboard init...
PNP: 002e.6 init
PNP: 002e.7 init
PCI: 00:02.0 init
PCI: 00:02.1 init
PCI: 00:06.0 init
IDE1 IDE0
PCI: 00:07.0 init
SATA S SATA P
PCI: 00:08.0 init
SATA S SATA P
PCI: 00:09.0 init
dev_root mem base = 0x00e0000000
[0x50] <-- 0xe0000000
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
PCI: 00:0d.0 init
PCI: 00:0e.0 init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 01:06.0 init
PCI: 01:07.0 init
PCI: 04:00.0 init
rom address for PCI: 04:00.0 = f4110000
Class Code mismatch ROM 00000002, dev 00020000
copying non-VGA ROM Image from 0xf4110000 to 0xd0000, 0x3800 bytes
entering emulator
d000:0649: C8 ILLEGAL EXTENDED X86 OPCODE!
halt_sys: file
/media/FastSpace/vince/repository/svn/coreboot/coreboot-v2/src/devices/emulator/x86emu/ops2.c,
line 60
PCI: 05:00.0 init
rom address for PCI: 05:00.0 = f4200000
copying VGA ROM Image from 0xf4200000 to 0xc0000, 0xe600 bytes
entering emulator
halt_sys: file
/media/FastSpace/vince/repository/svn/coreboot/coreboot-v2/src/devices/emulator/x86emu/ops.c,
line 4388
PCI: 05:00.1 init
Devices initialized
Entering get_bus_conf()
bus_ck804[0]=0
bus_ck804[1]=1
bus_ck804[2]=2
bus_ck804[3]=3
bus_ck804[4]=4
bus_ck804[5]=5
ERROR - could not find PCI 00:ffffffff.0, using defaults
bus_isa=6
Leaving get_bus_conf()
Writing IRQ routing tables to 0xf0000...done.
Entering get_bus_conf()
Wrote the mp table end at: 00000020 - 0000016c
Moving GDT to 0x500...ok
Adjust low_table_end from 0x00000530 to 0x00001000
Adjust rom_table_end from 0x000f0400 to 0x00100000
Wrote coreboot table at: 00000530 - 00000d24 checksum 3c92
elfboot: Attempting to load payload.
rom_stream: 0xfffc0000 - 0xfffdefff
Found ELF candidate at offset 0
header_offset is 0
Try to load at offset 0x0
New segment addr 0x100000 size 0x24bc0 offset 0xe0 filesize 0x6aac
(cleaned up) New segment addr 0x100000 size 0x24bc0 offset 0xe0 filesize 0x6aac
New segment addr 0x124bc0 size 0x48 offset 0x6b8c filesize 0x48
(cleaned up) New segment addr 0x124bc0 size 0x48 offset 0x6b8c filesize 0x48
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000024bc0 filesz:
0x0000000000006aac
Clearing Segment: addr: 0x0000000000106aac memsz: 0x000000000001e114
Loading Segment: addr: 0x0000000000124bc0 memsz: 0x0000000000000048 filesz:
0x0000000000000048
Jumping to boot code at 0x10007c
FILO version 0.5.6 ([EMAIL PROTECTED]) Wed Sep 3 21:18:32 CEST 2008
Press <Enter> for default boot, or <Esc> for boot prompt... 5 4
boot: hda1:/boot/k apic=debug hpet=force debug kgdbwait irqpoll loglevel=8
earlycon=uart8250,io,0x3f8,115200n8 earlyprintk=serial,ttyS0,115200 acpi=off
root=/dev/sda3 console=ttyS0,115200 init=/bin/bash
boot(line=hda1:/boot/k apic=debug hpet=force debug kgdbwait irqpoll loglevel=8
earlycon=uart8250,io,0x3f8,115200n8 earlyprintk=serial,ttyS0,115200 acpi=off
root=/dev/sda3 console=ttyS0,115200 init=/bin/bash)
boot(line=hda1:/boot/k apic=debug hpet=force debug kgdbwait irqpoll loglevel=8
earlycon=uart8250,io,0x3f8,115200n8 earlyprintk=serial,ttyS0,115200 acpi=off
root=/dev/sda3 console=ttyS0,115200 init=/bin/bash) file=hda1:/boot/k,
param=apic=debug hpet=force debug kgdbwait irqpoll loglevel=8
earlycon=uart8250,io,0x3f8,115200n8 earlyprintk=serial,ttyS0,115200 acpi=off
root=/dev/sda3 console=ttyS0,115200 init=/bin/bash
linux_load(file=hda1:/boot/k, cmdline=apic=debug hpet=force debug kgdbwait
irqpoll loglevel=8 earlycon=uart8250,io,0x3f8,115200n8
earlyprintk=serial,ttyS0,115200 acpi=off root=/dev/sda3 console=ttyS0,115200
init=/bin/bash)
file_open(filename=hda1:/boot/k)
file_open() : dev=hda1, path=/boot/k
hda: LBA 40GB: ST340016A
Mounted EXT2 filesystem
init INODE->i_size=0
init INODE->i_mode=0
skipslash : dirname was:/boot/k
skipslash : dirname is:boot/k
init INODE->i_size=0
init INODE->i_mode=0
init INODE->i_size=0
init INODE->i_mode=0
skipslash : dirname was:./k
skipslash : dirname is:./k
init INODE->i_size=0
init INODE->i_mode=0
skipslash : dirname was:/k
skipslash : dirname is:k
init INODE->i_size=2390480
init INODE->i_mode=100644
init INODE->i_size=0
init INODE->i_mode=0
skipslash : dirname was:debugger
skipslash : dirname is:debugger
init INODE->i_size=2390480
init INODE->i_mode=100644
Found Linux version 2.6.27-rc5 ([EMAIL PROTECTED]) #8 Fri Sep 5 03:58:51 CEST
2008 bzImage.
Loading kernel... ok
Jumping to entry point...
--
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
