On 09.09.2008 21:22, ron minnich wrote: > On Tue, Sep 9, 2008 at 12:14 PM, Alex Mauer <[EMAIL PROTECTED]> wrote: > >> Since the Jetway J7F2* and J7F4* motherboards appear to work fine, what >> can be done about getting targets for them? >> >> Mine at least (J7F2WE1G3) works without changing the irq_tables. The >> only change is in mainboard/via/epia-cn/Config.lb, changing "chip >> superio/via/vt1211" to "chip superio/fintek/f71805f". >> >> However, it would be nice(r) if there was a targets/jetway/j7f2 and >> presumably a src/mainboard/jetway/j7f2. >> >> I assume there would need to be some way of ensuring that the other >> files, like mainboard.c, auto.c, etc. stayed synchronised between them >> though. >> >> What needs to be done for a j7f2 target to be created? >> > > staying in sync is not really an issue. sometimes a board you derived > from changes, and you don't want those changes in your board. > > You are better off copying. > > So your first step is > mkdir -p mainboard/jetway/jf72 > svn add mainboard/jetway/jf72 > svn cp (or whatever) the various epia cn files to that dir. >
Right. And that's why we reduced the amount and size of files to be copied when the v3 architecture was designed. Regards, Carl-Daniel -- http://www.hailfinger.org/ -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
