Kevin O'Connor wrote:
> I had the same problem. I added
> device pci f.1 on end # IDE
> to the southbridge area of Config.lb and it seemed to resolve the
> issue.
Yep, that fixed it for me as well. I shouldn't have missed that one...
Attached please find a patch which:
* Changes the comment for device f.0 from "IDE" to "SATA"
* Turns on the Firewire device a.0
* Turns on the PATA device f.1
* Doesn't turn on the unusable device 10.5, which seems to be built-in
vt8237 ethernet.
Signed-off-by: Alex Mauer <[EMAIL PROTECTED]>
Index: src/mainboard/jetway/j7f24/Config.lb
===================================================================
--- src/mainboard/jetway/j7f24/Config.lb (revision 3576)
+++ src/mainboard/jetway/j7f24/Config.lb (working copy)
@@ -97,15 +97,16 @@
# Both cables are 40pin.
register "ide0_80pin_cable" = "0"
register "ide1_80pin_cable" = "0"
- device pci f.0 on end # IDE
register "fn_ctrl_lo" = "0x80"
register "fn_ctrl_hi" = "0x1d"
+ device pci a.0 on end # Firewire
+ device pci f.0 on end # SATA
+ device pci f.1 on end # IDE
device pci 10.0 on end # OHCI
device pci 10.1 on end # OHCI
device pci 10.2 on end # OHCI
device pci 10.3 on end # OHCI
device pci 10.4 on end # EHCI
- device pci 10.5 on end # UDCI
device pci 11.0 on # Southbridge LPC
chip superio/fintek/f71805f # Super I/O
device pnp 2e.0 off # Floppy
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
