On 23/09/08 19:28 +0200, Peter Stuge wrote: > Jordan Crouse wrote: > > Libpayload could do what you need. > .. > > > So Geode can do a splash screen really easily > > Note that the video mode set by libpayload's Geode driver does not > play well with most monitors. > > I have only been able to get an image on two old, analog-only TFT:s. > Newer/cheaper TFT:s and projectors can't sync. > > This is on an alix1c board. > > It would be great if the mode was tweaked a little to either the > standard 640x350 mode 3, or some standard framebuffer mode 640x480, > 800x600 or 1024x768.
Patches welcome. The intent is to emulate a 80x25 character screen, so whatever mode you want to use, you'll need to find an appropriate font to go along with it ( I think the current font will work at 8x14, but I'm not positive). Jordan -- Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc. -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
