On Fri, Oct 10, 2008 at 07:35:09PM +0300, Roman Yeryomin wrote: > > Note that that image I gave you will not send out much on serial, I reduced > > the coreboot log level because the alix.2c3 does not have a cmos battery > > and thus will always default to the hardcoded log level when powered on - > > and that's set to SPEW right now in the buildrom version. But you should > > see some output, and then a very quick jump to filo. > > > > Now - if your grub.list file on disk does not specify serial, you might not > > see filo on serial either. Does it? > > I can boot my kernel with your image, that's fine (I can see bios, filo and > kernel messages), but as soon as init starts there is no serial console > anymore. Very strange. But at the same time no problem with native bios...
Ah! Now we are talking. So your serial works until you hit init. That is a bit odd. It's entirely possible that coreboot is not doing something that busybox requires, but that is not required by init/(m)getty on debian. I'm not sure what that would be though :/ Thanks, Ward. -- Ward Vandewege <[EMAIL PROTECTED]> Free Software Foundation - Senior Systems Administrator -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
