Corey Osgood wrote: > Filo orders drives starting with IDE, For filo-0.5 the drive order is actually two drives per PCI bus controller.
For filo-0.6 (current trunk, using libpayload) the drive enumeration has changed to something else, but I don't know exactly what. I spent some time tracing through the code but just looking at it, it seems like it has changed the 0.5 functionality. Not sure. > so if the southbridge (not the motherboard) supports 2 IDE > channels, (4 drives), the first SATA device would be hde. Again it's in bus order so the right name depends on what comes before SATA on the PCI bus. > That should change if any of the ide channels are disabled, but > that depends on wether or not their being disabled correctly. Correct. > Also, FILO should have an option to use longer delays for some > buggy SATA devices, can you try it? Right - this is likely to be neccessary with mechanical media. //Peter -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
