On 29.10.2008 09:02, Corey Osgood wrote:
> Attached patches for cn700, vt8237(r/s), and the mainboard, Jetway J7F2,
> along with a boot log. Currently, we're stuck in a reboot loop and I have no
> idea why, seems to be related to CAR disabling (this wasn't happening when
> disable_car was a noop). Carl-Daniel, any ideas?
>   

Could you try this patch and report serial output back to the list? It
should at least give me an impression about where the code is broken.

Regards,
Carl-Daniel

Add more debugging to the critical stage1 code around disable_car().

Signed-off-by: Carl-Daniel Hailfinger <[EMAIL PROTECTED]>

Index: corebootv3-via_car/arch/x86/via/stage1.c
===================================================================
--- corebootv3-via_car/arch/x86/via/stage1.c    (Revision 958)
+++ corebootv3-via_car/arch/x86/via/stage1.c    (Arbeitskopie)
@@ -50,6 +50,7 @@
  */
 void disable_car(void)
 {
+       printk(BIOS_DEBUG, "disable_car entry\n");
        /* Determine new global variable location. Stack organization from top
         * Top 4 bytes are reserved
         * Pointer to global variables
@@ -60,9 +61,12 @@
        const struct global_vars *newlocation = (struct global_vars 
*)((RAM_STACK_BASE - sizeof(struct global_vars *) - sizeof(struct global_vars)) 
& ~0x7);
        /* Copy global variables to new location. */
        memcpy(newlocation, global_vars(), sizeof(struct global_vars));
+       printk(BIOS_DEBUG, "disable_car global_vars copy done\n");
        /* Set the new global variable pointer. */
        *(struct global_vars **)(RAM_STACK_BASE - sizeof(struct global_vars *)) 
= newlocation;
 
+       printk(BIOS_DEBUG, "disable_car global_vars pointer adjusted, entering 
asm code...");
+       printk(BIOS_DEBUG, 
"now..........................................................................\n");
        __asm__ __volatile__(
        /* We don't need cache as ram for now on */
        /* disable cache */
Index: corebootv3-via_car/arch/x86/stage1.c
===================================================================
--- corebootv3-via_car/arch/x86/stage1.c        (Revision 958)
+++ corebootv3-via_car/arch/x86/stage1.c        (Arbeitskopie)
@@ -264,6 +264,7 @@
 #ifdef CONFIG_CONSOLE_BUFFER
        /* Move the printk buffer to PRINTK_BUF_ADDR_RAM */
        printk_buffer_move((void *)PRINTK_BUF_ADDR_RAM, PRINTK_BUF_SIZE_RAM);
+       printk(BIOS_DEBUG, "Done printk() buffer move\n");
 #endif
        /* Turn off Cache-As-Ram */
        disable_car();


-- 
http://www.hailfinger.org/


--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to