Maybe this works..

//Peter
v3: superio/via/vt1211 with serial port init but nothing else

Signed-off-by: Peter Stuge <[EMAIL PROTECTED]>

Index: superio/via/vt1211/vt1211.h
===================================================================
--- superio/via/vt1211/vt1211.h	(revision 0)
+++ superio/via/vt1211/vt1211.h	(revision 0)
@@ -0,0 +1,36 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2007 Ronald G. Minnich <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef SUPERIO_VIA_VT1211_VT122_H
+#define SUPERIO_VIA_VT1211_VT122_H
+
+#define VT1211_FDC              0   /* Floppy */
+#define VT1211_PP               1   /* Parallel Port */
+#define VT1211_SP1              2   /* Com1 */
+#define VT1211_SP2              3   /* Com2 */
+#define VT1211_KBC              5   /* Keyboard & Mouse */
+#define VT1211_CIR              6
+#define VT1211_GAME_MIDI_GPIO1  7
+#define VT1211_GPIO2            8
+#define VT1211_GPIO3            9
+#define VT1211_ACPI            10
+#define VT1211_HWM             11   /* Hardware Monitor */
+
+#endif /* SUPERIO_VIA_VT1211_VT122_H */
Index: superio/via/vt1211/stage1.c
===================================================================
--- superio/via/vt1211/stage1.c	(revision 0)
+++ superio/via/vt1211/stage1.c	(revision 0)
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Peter Stuge <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <io.h>
+#include <device/pnp.h>
+#include "vt1211.h"
+
+void vt1211_enable_serial(u8 dev, u8 serial, u16 iobase)
+{
+	rawpnp_enter_ext_func_mode(dev);
+	rawpnp_set_logical_device(dev, serial);
+	rawpnp_set_enable(dev, 0);
+	rawpnp_set_iobase(dev, 2, (iobase>>2) & 0xff);
+	rawpnp_set_enable(dev, 1);
+	rawpnp_exit_ext_func_mode(dev);
+}
Index: superio/via/vt1211/superio.c
===================================================================
--- superio/via/vt1211/superio.c	(revision 0)
+++ superio/via/vt1211/superio.c	(revision 0)
@@ -0,0 +1,224 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2000 AG Electronics Ltd.
+ * Copyright 2003-2004 Linux Networx
+ * Copyright 2004 Tyan
+ * By LYH change from PC87360
+ * Copyright 2007 coresystems GmbH
+ *
+ * FIXME: This is total hack and slash of v2 code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <io.h>
+#include <lib.h>
+#include <device/device.h>
+#include <device/pnp.h>
+#include <console.h>
+#include <string.h>
+//#include <bitops.h>
+#include <uart8250.h>
+#include <keyboard.h>
+// #include <pc80/mc146818rtc.h>
+#include <statictree.h>
+#include "w83627hf.h"
+
+static void pnp_enter_ext_func_mode(struct device * dev) 
+{
+        outb(0x87, dev->path.pnp.port);
+        outb(0x87, dev->path.pnp.port);
+}
+
+static void pnp_exit_ext_func_mode(struct device * dev) 
+{
+        outb(0xaa, dev->path.pnp.port);
+}
+
+static void pnp_write_index(u16 port_base, u8 reg, u8 value)
+{
+        outb(reg, port_base);
+        outb(value, port_base + 1);
+}
+
+static u8 pnp_read_index(u16 port_base, u8 reg)
+{
+        outb(reg, port_base);
+        return inb(port_base + 1);
+}       
+
+static void enable_hwm_smbus(struct device * dev) {
+	/* set the pin 91,92 as I2C bus */
+	u8 reg, value;
+	reg = 0x2b;
+	value = pnp_read_config(dev, reg);
+	value &= 0x3f;
+	pnp_write_config(dev, reg, value);
+}
+
+static void init_acpi(struct device * dev)
+{
+	u8  value = 0x20;
+	int power_on = 1;
+#warning Fix CMOS handling
+	// get_option(&power_on, "power_on_after_fail");
+	pnp_enter_ext_func_mode(dev);
+	pnp_write_index(dev->path.pnp.port,7,0x0a); 
+	value = pnp_read_config(dev, 0xE4);
+	value &= ~(3<<5);
+	if(power_on) {
+		value |= (1<<5);
+	}
+	pnp_write_config(dev, 0xE4, value);
+        pnp_exit_ext_func_mode(dev);  
+}
+
+static void init_hwm(u16 base)
+{
+	u8  reg, value;
+	int i;
+
+	unsigned  hwm_reg_values[] = {
+	    /* reg, mask, data */
+              0x40, 0xff, 0x81,  /* start HWM */
+              0x48, 0xaa, 0x2a,  /* set SMBus base to 0x54>>1	*/
+              0x4a, 0x21, 0x21,  /* set T2 SMBus base to 0x92>>1 and T3 SMBus base to 0x94>>1 */
+              0x4e, 0x80, 0x00,  
+              0x43, 0x00, 0xff,
+              0x44, 0x00, 0x3f,
+              0x4c, 0xbf, 0x18,
+              0x4d, 0xff, 0x80   /* turn off beep */
+                                                                            
+	};
+
+	for (i = 0; i < ARRAY_SIZE(hwm_reg_values); i += 3) { 
+		reg = hwm_reg_values[i];	
+	 	value = pnp_read_index(base, reg);		
+		value &= 0xff & hwm_reg_values[i+1];
+		value |= 0xff & hwm_reg_values[i+2];
+
+		printk(BIOS_SPEW, "base = 0x%04x, reg = 0x%02x, value = 0x%02x\r\n", base, reg,value);
+
+		pnp_write_index(base, reg, value);
+	}
+}
+
+static void w83627hf_init(struct device * dev)
+{
+	struct superio_winbond_w83627hf_dts_config *conf;
+	struct resource *res0, *res1;
+	struct pc_keyboard keyboard;
+
+#if 1
+	printk(BIOS_ERR, "dummy init XXXX\n");
+#endif
+
+	if (!dev->enabled) {
+		return;
+	}
+
+	conf = dev->device_configuration;
+	switch(dev->path.pnp.device) {
+	case W83627HF_SP1: 
+		res0 = find_resource(dev, PNP_IDX_IO0);
+#warning init_uart8250
+		//init_uart8250(res0->base, &conf->com1);
+		break;
+	case W83627HF_SP2:
+		res0 = find_resource(dev, PNP_IDX_IO0);
+#warning init_uart8250
+		//init_uart8250(res0->base, &conf->com2);
+		break;
+	case W83627HF_KBC:
+		res0 = find_resource(dev, PNP_IDX_IO0);
+		res1 = find_resource(dev, PNP_IDX_IO1);
+		init_pc_keyboard(res0->base, res1->base, &keyboard);
+		break;
+        case W83627HF_HWM:
+                res0 = find_resource(dev, PNP_IDX_IO0);
+#define HWM_INDEX_PORT 5
+                init_hwm(res0->base + HWM_INDEX_PORT);
+                break;
+        case W83627HF_ACPI:
+                init_acpi(dev);
+                break;
+	}
+}
+
+void w83627hf_pnp_set_resources(struct device * dev)
+{
+	pnp_enter_ext_func_mode(dev);  
+	pnp_set_resources(dev);
+        pnp_exit_ext_func_mode(dev);  
+        
+}       
+        
+void w83627hf_pnp_enable_resources(struct device * dev)
+{       
+        pnp_enter_ext_func_mode(dev);  
+	pnp_enable_resources(dev);               
+        switch(dev->path.pnp.device) {
+	case W83627HF_HWM:
+		printk(BIOS_DEBUG, "w83627hf hwm smbus enabled\n");
+		enable_hwm_smbus(dev);
+		break;
+	}
+        pnp_exit_ext_func_mode(dev);  
+
+}
+
+void w83627hf_pnp_enable(struct device * dev)
+{
+
+        if (!dev->enabled) {
+                pnp_enter_ext_func_mode(dev);   
+
+                pnp_set_logical_device(dev);
+                pnp_set_enable(dev, 0);
+
+                pnp_exit_ext_func_mode(dev);  
+        }
+}
+static void phase2_setup_scan_bus(struct device *dev);
+struct device_operations w83627hf_ops = {
+	.phase2_setup_scan_bus = phase2_setup_scan_bus,
+	.phase4_read_resources   = pnp_read_resources,
+	.phase4_set_resources    = w83627hf_pnp_set_resources,
+	.phase4_enable_disable   = w83627hf_pnp_enable_resources,
+	.phase5_enable_resources = w83627hf_pnp_enable,
+	.phase6_init             = w83627hf_init,
+};
+
+static struct pnp_info pnp_dev_info[] = {
+        { &w83627hf_ops, W83627HF_FDC,  PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, },
+        { &w83627hf_ops, W83627HF_PP,   PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, },
+        { &w83627hf_ops, W83627HF_SP1,  PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, },
+        { &w83627hf_ops, W83627HF_SP2,  PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, },
+        // No 4 { 0,},
+        { &w83627hf_ops, W83627HF_KBC,  PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, { 0x7ff, 0 }, { 0x7ff, 0x4}, },
+        { &w83627hf_ops, W83627HF_CIR, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, },
+        { &w83627hf_ops, W83627HF_GAME_MIDI_GPIO1, PNP_IO0 | PNP_IO1 | PNP_IRQ0, { 0x7ff, 0 }, {0x7fe, 0x4}, },
+        { &w83627hf_ops, W83627HF_GPIO2, },
+        { &w83627hf_ops, W83627HF_GPIO3, },
+        { &w83627hf_ops, W83627HF_ACPI, },
+        { &w83627hf_ops, W83627HF_HWM,  PNP_IO0 | PNP_IRQ0, { 0xff8, 0 }, },
+};
+
+
+static void phase2_setup_scan_bus(struct device *dev)
+{
+	pnp_enable_devices(dev, &w83627hf_ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info);
+}
+
Index: superio/via/vt1211/Makefile
===================================================================
--- superio/via/vt1211/Makefile	(revision 0)
+++ superio/via/vt1211/Makefile	(revision 0)
@@ -0,0 +1,29 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Peter Stuge <[EMAIL PROTECTED]>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+ifeq ($(CONFIG_SUPERIO_VIA_VT1211),y)
+
+STAGE0_CHIPSET_SRC += $(src)/superio/via/vt1211/stage1.c
+STAGE0_CHIPSET_SRC += $(src)/device/pnp_raw.c
+
+# Always add to variables, as there could be more than one Super I/O.
+#STAGE2_CHIPSET_SRC += $(src)/superio/via/vt1211/superio.c
+
+endif
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to