This patch will fail to compile without my other patch to drop/disable the non-working enable_hpet() function in ICH7.
Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
Drop #defines for registers that are not existant on the ICH7. Also, fix BIOS_CNTL, which is 0xdc on ICH7. Build-tested with kontron/986lcd-m. Signed-off-by: Uwe Hermann <[EMAIL PROTECTED]> Index: src/southbridge/intel/i82801gx/i82801gx.h =================================================================== --- src/southbridge/intel/i82801gx/i82801gx.h (Revision 3715) +++ src/southbridge/intel/i82801gx/i82801gx.h (Arbeitskopie) @@ -24,18 +24,20 @@ #include "chip.h" extern void i82801gx_enable(device_t dev); -#define PCI_DMA_CFG 0x90 #define SERIRQ_CNTL 0x64 -#define GEN_CNTL 0xd0 -#define GEN_STS 0xd4 -#define RTC_CONF 0xd8 + #define GEN_PMCON_1 0xa0 #define GEN_PMCON_2 0xa2 #define GEN_PMCON_3 0xa4 +/* GEN_PMCON_3 bits */ +#define RTC_BATTERY_DEAD (1 << 2) +#define RTC_POWER_FAILED (1 << 1) +#define SLEEP_AFTER_POWER_FAIL (1 << 0) + #define PMBASE 0x40 #define ACPI_CNTL 0x44 -#define BIOS_CNTL 0x4E +#define BIOS_CNTL 0xDC #define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */ #define GPIO_CNTL 0x4C /* LPC GPIO Control Register */ @@ -48,28 +50,10 @@ #define PIRQG_ROUT 0x6A #define PIRQH_ROUT 0x6B -#define FUNC_DIS 0xF2 - #define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */ #define LPC_EN 0x82 /* LPC IF Enables Register */ -#define SBUS_NUM 0x19 -#define SUB_BUS_NUM 0x1A -#define SMLT 0x1B -#define IOBASE 0x1C -#define IOLIM 0x1D -#define MEMBASE 0x20 -#define MEMLIM 0x22 -#define CNF 0x50 -#define MTT 0x70 -#define PCI_MAST_STS 0x82 - -/* GEN_PMCON_3 bits */ -#define RTC_BATTERY_DEAD (1 << 2) -#define RTC_POWER_FAILED (1 << 1) -#define SLEEP_AFTER_POWER_FAIL (1 << 0) - -/* PCI Configuration Space (D31:F1) */ +/* PCI Configuration Space (D31:F1): IDE */ #define INTR_LN 0x3c #define IDE_TIM_PRI 0x40 /* IDE timings, primary */ #define IDE_DECODE_ENABLE (1 << 15) @@ -84,7 +68,7 @@ #define PCB1 (1 << 1) #define PCB0 (1 << 0) -/* PCI Configuration Space (D31:F3) */ +/* PCI Configuration Space (D31:F3): SMBus */ #define SMB_BASE 0x20 #define HOSTC 0x40
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
