yep, ive extraced my vga using awardeco which should be fine (and it does seems fine on the lspci -n, which is very frustrating)
On Fri, Nov 7, 2008 at 4:48 AM, Joseph Smith <[EMAIL PROTECTED]> wrote: > > > > On Fri, 7 Nov 2008 04:24:38 +0200, "Elia Yehuda" <[EMAIL PROTECTED]> > wrote: > > tnx Joseph, > > > > i've fixed the following (to match my 256kb bios) : > > > > device pci_domain 0 on > > > > device pci 0.0 on end # Host bridge > > chip drivers/pci/onboard > > device pci 1.0 on end # Onboard video > > register "rom_address" = "0xfffc0000" > > end > > ... > > end > > > > and now the rom_address is set AND i see the device in lspci : > > lspci: > > 00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) > > Chipset Graphics Controller (rev 03) > > lspci -n: > > 00:01.0 0300: 8086:7125 (rev 03) > > > > but still no vga-output! > > i found the following to might suggest another problem : > > > > PCI Expansion ROM, signature 0xaa55, INIT size 0xa000, data ptr 0x0110 > > PCI ROM Image, Vendor 8086, Device 0000, > > Device or Vendor ID mismatch Vendor 8086, Device 0000 > > > > and no "copying VGA ROM Image"... > Yep that is your problem. Is there something wrong with your vga bios. It > is reading the vendor id ok but the device id should be 7125. > Have you checked this out? It may help you to get a valid vga bios. > http://www.coreboot.org/VGA_support > > -- > Thanks, > Joseph Smith > Set-Top-Linux > www.settoplinux.org > >
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
