Author: uwe
Date: 2008-11-16 14:45:53 +0100 (Sun, 16 Nov 2008)
New Revision: 1034
Modified:
coreboot-v3/superio/winbond/w83627hf/dts
Log:
Fix some incorrect entries in superio/winbond/w83627hf/dts.
The hardware monitor defaults as per datasheet are 0x0000 / 0, but on
hardware that uses this functionality it seems to be 0x290 / 5 often,
thus use those values in the dts.
Signed-off-by: Uwe Hermann <[EMAIL PROTECTED]>
Acked-by: Myles Watson <[EMAIL PROTECTED]>
Modified: coreboot-v3/superio/winbond/w83627hf/dts
===================================================================
--- coreboot-v3/superio/winbond/w83627hf/dts 2008-11-16 13:41:15 UTC (rev
1033)
+++ coreboot-v3/superio/winbond/w83627hf/dts 2008-11-16 13:45:53 UTC (rev
1034)
@@ -20,18 +20,20 @@
{
device_operations = "w83627hf_ops";
+
/* To override any of these, put the over-ride in mainboard dts. */
/* Floppy */
floppyenable = "0";
floppyio = "0x3f0";
- floppyirq = "0x60";
- floppydrq = "0x02";
+ floppyirq = "6";
+ floppydrq = "2";
/* Parallel port */
ppenable = "0";
ppio = "0x378";
ppirq = "7";
+ ppdrq = "4";
/* COM1 */
com1enable = "0";
@@ -43,23 +45,23 @@
com2io = "0x2f8";
com2irq = "3";
- /* Keyboard */
+ /* PS/2 keyboard + PS/2 mouse */
kbenable = "0";
kbio = "0x60";
- kbio2 = "0x62";
+ kbio2 = "0x64";
kbirq = "1";
kbirq2 = "12";
/* Consumer IR */
cirenable = "0";
- /* Game port */
+ /* Game port, MIDI port, GPIO1 */
gameenable = "0";
- gameio = "0x220";
- gameio2 = "0x400";
+ gameio = "0x201";
+ gameio2 = "0x330";
gameirq = "9";
- /* GPIO2 */
+ /* GPIO2, watchdog timer */
gpio2enable = "0";
/* GPIO3 */
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
