Author: mraudsepp
Date: 2008-11-17 11:31:40 +0100 (Mon, 17 Nov 2008)
New Revision: 1037
Modified:
coreboot-v3/mainboard/artecgroup/dbe62/initram.c
Log:
artecgroup/dbe62: Remove old memory setup related commented out calls and touch
up a comment.
I see no reason to have these memory work related debug calls commented out in
the code, everyone should know what to locally temporarily add to debug this.
Signed-off-by: Mart Raudsepp <[EMAIL PROTECTED]>
Acked-by: Peter Stuge <[EMAIL PROTECTED]>
Modified: coreboot-v3/mainboard/artecgroup/dbe62/initram.c
===================================================================
--- coreboot-v3/mainboard/artecgroup/dbe62/initram.c 2008-11-16 22:59:52 UTC
(rev 1036)
+++ coreboot-v3/mainboard/artecgroup/dbe62/initram.c 2008-11-17 10:31:40 UTC
(rev 1037)
@@ -116,15 +116,13 @@
}
/**
- * main for initram for the PC Engines Alix 1C. It might seem that you
- * could somehow do these functions in, e.g., the cpu code, but the
+ * main for initram for the Artec Group ThinCan DBE62. It might seem that
+ * you could somehow do these functions in, e.g., the cpu code, but the
* order of operations and what those operations are is VERY strongly
* mainboard dependent. It's best to leave it in the mainboard code.
*/
int main(void)
{
- void dumplxmsrs(void);
-
printk(BIOS_DEBUG, "Hi there from stage1\n");
post_code(POST_START_OF_MAIN);
@@ -149,13 +147,6 @@
sdram_enable(DIMM0, DIMM1);
printk(BIOS_DEBUG, "done sdram enable\n");
- /*dumplxmsrs();*/
- /* Check low memory */
- /* The RAM is working now. Leave this test commented out but
- * here for reference.
- * Note that the range 0x87000 will fail; that's the stack! */
- /* ram_check(0x00000000, 640*1024);*/
-
printk(BIOS_DEBUG, "stage1 returns\n");
return 0;
}
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
